Select Page

For Use at Low-temperature
When making use of conveyor chains at low-temperature this kind of as in a fridge or in the cold ambiance, the following disorders could occur.
1) Minimal temperature brittleness
Generally, a materials is embrittled at low-temperature and shock resistance is lowered. This phenomenon is termed low-temperature brittleness, as well as degree of embrittlement differs from material to material.
The services restrict of the conveyor chain depends upon its specifications.
2)Influence of freezing
At low-temperature, bending failure, roller rotation failure, fixing of chain, and so on. can be triggered by the freezing of penetrated water or deposited frost in the clearance between pins and bushings, bushings and rollers or inner plates and outer plates. These conditions cause an overload to act over the chain and drive, diminishing the existence of your chain.
To stop freezing, usually, it can be proposed to fill the clearances with a low-temperature lubricant suitable to your services temperature to avoid water, frost, and so on. from penetrating the respective portions from the chain. For lubrication, a silicon based grease is proposed.
For Use at High-temperature
Chains strength is diminished by high-temperature atmosphere, direct conveying of high-temperature loads, or radiated heat, etc. The service limit at high-temperature depends not on the temperature of the support setting but the temperature and materials with the chain body.
Following ailments may come about when chains are made use of at high-temperature:
1) High temperature brittleness and fracture by lowered hardness of heat treated material
two) Brittleness brought on by carbide precipitation
3) Abnormal dress in by scale
4) Fatigue fracture induced by repeated thermal shock (cooling and growth)
five) Abnormal dress in as a consequence of an increase while in the coefficient of friction
six) Creep fracture
seven) Fracture due to thermal fatigue of welded place
8) Effects induced by thermal expansion
?Stiff backlinks and rotation failure as a consequence of decreased clearance ?Fatigue fracture resulting from lowered fitting force
9)Lubrication failure and stiff backlinks because of deterioration and carbonization of lubricating oil
Grease outstanding in heat resistance contain these depending on silicon, graphite or molybdenum disulfide.
For use at high-temperature, high-temperature resistance bearings and stainless steel bearings are suggested.