What is a Stick Cylinder?
A stick cylinder is an important part of the excavator boom system. It is a hydraulic cylinder that is connected to the arm of an excavator and is responsible for controlling the positioning and angle of the arm. The angle and positioning of the stick cylinder determines how the arm of the excavator moves. The angle and positioning of the stick cylinder affects the excavator’s digging capabilities, as it directly affects how the arm moves and how deep the bucket can dig.
Situations When Stick Cylinder Positioning and Angle Affect Excavator Digging Capabilities
1. Unstable Stick Cylinder Positioning
When the stick cylinder positioning is unstable, the excavator’s digging capabilities are affected. This is because the stick cylinder is responsible for controlling the arm of the excavator, and when the positioning is not stable, the arm can move more erratically. This can make it difficult for the excavator to dig deep and accurately.
2. Wrong Angle of Stick Cylinder
When the angle of the stick cylinder is wrong, the excavator’s digging capabilities are also affected. This is because the angle of the stick cylinder determines how the arm of the excavator moves. If the angle is not correct, the arm will not move in the desired direction, making it difficult to dig accurately and deeply.
3. Defective Stick Cylinder
When the stick cylinder is defective, it can also affect the excavator’s digging capabilities. This is because the stick cylinder is responsible for controlling the arm of the excavator, and if it is defective, the arm will not move as it should. This can make it difficult for the excavator to dig deep and accurately.
Solutions to Resolve Stick Cylinder Positioning and Angle Issues Affecting Excavator Digging Capabilities
1. Check Stick Cylinder for Defects
The first step in resolving stick cylinder positioning and angle issues affecting excavator digging capabilities is to check the stick cylinder for defects. This can be done by examining the cylinder for any signs of damage or wear and tear. If any defects are found, the stick cylinder should be replaced immediately.
2. Adjust Stick Cylinder Positioning
The second step is to adjust the stick cylinder positioning. This can be done by loosening the bolts that hold the cylinder in place and adjusting the angle and positioning of the cylinder. Once the cylinder is in the desired position, the bolts should be tightened to secure the cylinder.
3. Check for Proper Angle of Stick Cylinder
The third step is to check for the proper angle of the stick cylinder. This can be done by examining the angle of the cylinder to make sure it is in the correct position. If the angle is not correct, it should be adjusted until it is in the desired position.
Steps to Confirm Stick Cylinder Positioning and Angle Issue Resolved and Preventing Future Issues
1. Test Excavator Digging Capabilities
The first step in confirming the stick cylinder positioning and angle issue is resolved is to test the excavator’s digging capabilities. This can be done by operating the excavator and digging with the bucket to check if the excavator can dig deep and accurately.
2. Check Stick Cylinder Position and Angle
The second step is to check the stick cylinder position and angle. This can be done by examining the position and angle of the cylinder to make sure it is in the correct position and angle.
3. Regularly Check Stick Cylinder for Defects
The third step is to regularly check the stick cylinder for defects. This can be done by examining the cylinder for any signs of damage or wear and tear. If any defects are found, the stick cylinder should be replaced immediately.
Points to Consider When Resolving Stick Cylinder Positioning and Angle Issues Affecting Excavator Digging Capabilities
- Always make sure to use the correct tools when adjusting the stick cylinder positioning and angle.
- Make sure to check the stick cylinder for any defects before adjusting the positioning and angle.
- Always make sure the angle and positioning of the stick cylinder is correct before operating the excavator.
- Regularly check the stick cylinder for any defects to prevent future issues.
Contact WLY Transmission for Assistance With Stick Cylinder Positioning and Angle Issues Affecting Excavator Digging Capabilities
If the issue with the stick cylinder positioning and angle is not resolved, customers can contact the technical department of WLY Transmission. We will assist in handling the issue and our email will be processed within 24 hours.
Take a Tour of Our VR Factory
WLY – Quality Products, Preferential Prices and Considerate Services
WLY is an experienced supplier and manufacturer in China. The products mainly include forklift hydraulic cylinders, agricultural machinery cylinders, construction cylinders, design capacity of 200,000 sets, and 300 sets of all kinds of fully automatic CNC production equipment and automatic hydraulic cylinder assembly equipment. In addition, we also supply Aerial work platform cylinder, Sanitation vehicle cylinder, Telescopic handler boom cylinder, excavator hydraulic cylinder, Offshore Cylinder, Energy Technology Cylinder, Tunnel Boring Machine Cylinder etc., and welcome customers to customize with drawings or samples.
