Select Page

Types of Taper Bushes

A taper bush is a convenient and cost-effective way of mounting a shaft component on a drive shaft. These bushes are made with a pre-machined bore and come with locking set screws, saving the time and effort of machining keyways and bores. They also have a half-hole on the outside diameter to match a shaft’s bore. They also come with threads on one side and shallow keyways, making them a versatile solution for a wide range of applications.

The most popular type of taper bush is used in planetary gears and other machine tools. It is typically used in combination with a planetary gearbox to secure machine elements to a cylindrical shaft. It is usually secured with multiple screws or bolts in a row that run parallel to the axis of the hub. This system has several advantages, including the ability to balance mass imbalances between the bush and the mating hub.

This type of bushing is made of steel and has an eight-degree taper. They are generally rust-resistant and will not corrode or break apart in the field. Taper-lock bushings are particularly useful in applications where dimensional accuracy is critical. They are easily installed and can fit flush into a tapered bushing sprocket or pulley. They are available in both metric and inch sizes.

Another popular type of taper bush is a steel taper lock bush. These taper bushes are becoming popular in New Zealand as they are more robust and durable. The steel taper lock bushes, which are also known as the TSR bush, are a highly resilient, reusable solution for high torque and impact applications. They are also infinitely stronger, machine-friendly, and able to absorb higher shock loads. These bushes are also a great alternative to taper-lock bushes for a variety of applications.

A taper bushes are typically used for power transmission drives. They are precision-cast iron and have been computer-etched for size identification. They can be used with many different types of pulleys, sprockets, and hubs. A taper bush ensures successful installation and alignment of sprockets. There are also cast-in metric and imperial models of these bushes. If you’re looking for a taper nut, check out Stationary Engine Parts.

In addition to taper nut and bolt, these bushes are designed to hold hubs securely on shafts. In addition, they also provide axially-centred fixing without the use of keyways. When compared to keyways, they also offer more precision and better centring than traditional methods. However, when you’re looking for taper nut and bolt, make sure to purchase a pair of matching taper bushes.