Select Page

The main measurements of the Tapered Roller Bearing china Tapered roller bearings conform to DIN ISO 355 and DIN 720. Dimensional and running tolerances match tolerance school PN acc. to DIN 620. These tolerance classes are standard and are perfect for most applications.

The bearings are separable. This implies the bearing parts could be fitted independently of each different. The bearings are provided without seals. They are often lubricated with grease or oil from the side.

The rollers are processed to create pore-like micro indents in the surface of the steel (rolling contact surface area and roller mind). This microstructure helps maintain an oil film that’s perfect for tapered roller bearing applications. Improved essential oil film retention drastically inhibits surface damage, obtaining more than eight moments higher strength and equal or increased seizure resistance compared to conventional products.
Much better lubricant oil accumulation and retention (simpler to form oil film) in the roller surface contributes to 10% lower friction by low speeds in comparison to conventional products.
Tapered roller bearings may accept large radial and axial loads. Axial loads happen to be absorbed in only one path. For axial counter support another bearing attached inverse is required. Suitable for medium speeds.

Larger efficiency transmission systems have emerged as key to improving gasoline economy, so NSK set out to develop a excessive reliability bearing capable of overcoming these hurdles.

To boost fuel economy, there has been a change to using less lubricant and/or cheaper viscosity lubricant in transmission systems. Therefore, tapered roller bearings in transmissions are being subject to increasingly severe lubrication conditions, increasing the risk of lubrication oil film depletion (lean lubrication circumstances), surface damage, and bearing seizure.