Select Page

Hanging Pulleys meant for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
Designs C, D, and J have got a bracket on the bottom for tying off one end of a rope.
Style K reduce the force needed to keep your load set up. Unlike standard pulleys, these have a V-groove for more grasp on your rope, and they ratchet when under load so they won’t slip in the other direction. Pulley for3/8″ dia. rope could be established to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Install these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Aluminium and nylon are light-weight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Acetal and light weight aluminum are lightweight and corrosion resistant. Galvanized metal is certainly more corrosion resistant than iron and steel. Stainless steel is the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless steel can be more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a flat surface to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Stainless steel is more corrosion resistant than steel.
Hanging Pulleys intended for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about 50 % the drive of a single-groove pulley to go the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum can be corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang as part of your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys possess a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a flat surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move a single load, such as for example block and deal with systems.They are able to reduce the force had a need to move the load by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or products over people.
Hanging Pulleys to get Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and deal with systems. They require about half the pressure of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Style E pulleys have bracket on the bottom that enables you to tie off one end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a totally free rope end is not needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the push of a single-groove pulley to move the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Design C to keep rope secure.
Warning: Never use to lift people or items over people
Hanging Pulleys for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move an individual load, such as block and deal with systems. They can reduce the force had a need to move the load by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Style A pulleys possess a bracket on underneath for tying off a single end of a rope.
Warning: Never make use of to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed.
Warning: Never make use of to lift people or items over people.