Triangle PTO Shaft Tubing Series (PTO Driveshaft T Series)
The PTO shaft is one of the very important pieces of tractor equipment used to transmit power from the tractor to the equipment behind the tractor. Whether you are going to use a haymaker, tiller, or any other equipment, please note the importance of the correct sizing of the PTO shaft. Triangle PTO shaft is one of the tubing type that we can offer.
Triangle PTO Shaft
It is important to select the correct PTO shaft for the right tractor model and driveline series. Choosing the wrong type of shaft can cause damage to the tractor, attached implement, or both. Ultimately, you will have to purchase a new PTO shaft or replace parts of your existing shaft. The proper triangle PTO shaft is an essential part of tractor drivelines. It ensures a smooth transfer of power.
Structure of Triangle PTO Shaft
Here is the picture that helps you to get a better idea of the structure of the triangle PTO shaft.
WLY Triangle PTO Shaft Specifications
Triangle PTO Shaft Features
This triangle PTO Shaft is made for use on a variety of tractors. These triangle PTO shafts have different features and are designed for long life. A safety shield on both ends of the triangle PTO shaft will prevent the PTO from rotating while the front end is exposed. If it's unprotected, the yoke ears could be damaged. Insufficient lubrication will also lead to undue wear on the shield bearings. To avoid this, lubricate the shield bearings every eight hours. While this may sound like an unnecessary step, it will make it easier to prevent a crash while working with the PTO.
How to Measure the triangle PTO Shaft?
The main factor in determining whether your PTO shaft is square, round, or oval is the type and series of shafting it has. Domestic PTOs have square, rectangular, or hex-splined shafts, while Italian and German drivelines have bell-shaped or star-shaped shafts. The size of the shaft will depend on what you're replacing. Some of the more popular types are referred to as Metric, and the measurements will be on the universal joint itself.
In the closed position, meaning the triangular PTO shaft tubing is minimal. Get a measuring tape to measure from the outside of each side yoke to get the closed length. Be sure to know if you have shear pin implement ends, sliding clutch implement ends, or splined implement ends.
Production of Triangle PTO Shaft
WLY, a member of the Ever-power Transmission, is specialized in developing, manufacturing, and marketing PTO drive shafts, reducers, sprockets, industrial and conveyor chains, belts, pulleys, gears, racks, gearboxes, etc. Our products gained a great reputation in Europe, America, Asia, Australia, and North American customers. As a professional OEM supplier, we are committed to implementing “Quality first, Price Competitive”. We already got the CE, TS/16949, ISO9001 Certificates and systematic manufacturing equipment and QC team to guarantee our quality and delivery. We warmly welcome every friend to visit us and establish a mutually beneficial long-term relationship cooperation.
Installation of Triangle PTO Shaft
1. Press-fit the plastic tubes and plastic cones.
2.Grease the groove on the yoke.
3.Slide the nylon bearings into the grooves.
4.Align the nylon bearing on the plastic shield.
Related Triangle PTO Shaft Parts
A PTO shaft is an integral part of an agricultural gearbox. In either case, the PTO must be engaged before it can be used. It also has two stages of transmission clutches, which must be operated properly to avoid damage. In addition to the PTO shaft, the agricultural PTO gearbox contains other important components, such as the clutches. In addition to the PTO shaft, the agricultural gearbox also requires the correct lubrication. The correct lubrication is necessary to prevent the gearbox from sticking and make the tractor run more smoothly. Also, using a grease gun to lubricate the agricultural gearbox is essential.
Edited by Zqq.
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.