PTO Shaft-Replacement of Weasler 6 Series PTO Shaft
WLY high-performance PTO drive shaft is the most important drive shaft solution in the agriculture, lawn, and lawn industry. The WLY PTO drive shaft is a complete assembly from the tractor to the implement. They are designed for continuous heavy-duty use and meet the requirements of large farms and contractors. WLY PTO drive shaft can perfectly replace Weasler brand 6 Series PTO Shaft.
PTO Shaft-Replacement of Weasler 6 Series PTO Shaft |
The Weasler 6 Series PTO shaft is a driveline component used to transfer power from a tractor to a variety of implements and machines, such as mowers, balers, and sprayers. The 6 Series is a heavy-duty PTO shaft designed for use with high-horsepower tractors and heavy-duty applications.
Weasler 6 Series PTO Shaft Parts
Tractor Yokes of Weasler 6 Series PTO Shaft
Dim. “A” Bore | Dim. “B” | |
Spring-Lok |
1 3/8” × 6 Spl. | 3 7/8” |
1 3/8” × 21 Spl. | 3 7/8” | |
Spring-Lok (metal collar) |
0..98” × 10 Spl. | 2 3/4” |
1” × 15 Spl. | 2 3/4” | |
Auto-Lock |
0..98” × 10 Spl. | 3 1/8” |
1” × 15 Spl. | 3 1/8” | |
Male Spline |
1” × 15 Spl.5 | 5 3/8” |
Quick Disconnect |
1 3/8” x 6 Spl. | 3 7/8” |
1 3/8” x 21 Spl. | 3 7/8” |
Cross & Bearing Kit of Weasler 6 Series PTO Shaft
Dim. “A” | Dim. “B” | |
31/32” | 2 9/32” |
Slip Sleeve of Weasler 6 Series PTO Shaft
Length | Dim. “A” Bore | Dim. “B” Bore | Fits Tube Size | |
With Grease Groove |
4” | 3/4” × 7/8” Rect. | 1 1/2” (.065 Wall) | |
3” | 1” × 15 Spl. | 1 1/2” (.065 Wall) |
Shaft Weld Yoke of Weasler 6 Series PTO Shaft
Dim. “A” Bore | Dim. “B” Bore | Dim. “C” | |
With Bearing Groove |
3/4” × 7/8” | 2 1/2” | |
1” × 15 Spl. | 2 1/4” | ||
3/4” × 7/8” | 2 1/4” | ||
Without Bearing Groove |
1” × 15 Spl. | 2 1/2” |
Tube of Weasler 6 Series PTO Shaft
Length | Fits Shaft | |
1” × 1 1/8” Rectangular O.D. |
6’ | 3/4” × 7/8” |
3’ | 3/4” × 7/8” | |
1 1/2” Round (.065 Wall ) O.D. |
6’ | |
3’ |
Shafts for Weasler 6 Series PTO Shaft
Length | |
3/4” × 7/8” Rectangular |
6'/3' |
1” × 15 Spline |
3' |
Tube Weld Yoke of Weasler 6 Series PTO Shaft
Dim. “A” Bore | Dim. “B” | |
With Bearing Groove |
1” × 1 1/8” | 2 1/2” |
Dim. “A” | Fits Tibe Size | |
3 5/8” | 1 1/2” (.065 Wall) | |
2 1/2” | 1 1/2” (.065 Wall) | |
2 1/2” | 1 1/2” (.065 Wall) |
Implement Yoke of Weasler 6 Series PTO Shaft
Dim. “A” Bore | Dim. “B” | Standard Keyway | |
With Keyway & Set Screw |
5/8” | 2 1/2” | 3/16” |
3/4” | 2 1/2” | 3/16” | |
13/16” | 2 1/2” | 3/16” | |
7/8” | 2 1/2” | 3/16” | |
15/16” | 2 1/2” | 1/4” | |
1” | 2 1/2” | 1/4” | |
1 1/8” | 2 1/2” | 1/4” | |
1 3/16” | 2 1/2” | 1/4” | |
1 1/4” | 2 1/2” | 1/4” | |
Dim. “A” Bore | Double Keyway | Dim. “B” | |
3/4” | 3/16” & 1/4” | 2 1/2” | |
13/16” | 3/16” & 1/4” | 2 1/2” | |
7/8” | 3/16” & 1/4” | 2 1/2” | |
1” | 3/16” & 1/4” | 2 1/2” | |
1 1/8” | 1/4” & 5/16” | 2 1/2” | |
1 3/16” | 1/4” & 5/16” | 2 1/2” | |
1 1/4” | 1/4” & 5/16” | 2 1/2” |
Dim. “A” Bore | Dim. “B” | |
Square Bore |
3/4” | 2 1/2” |
7/8” | 2 1/2” | |
1” | 2 1/2” | |
1 1/8” | 2 1/2” | |
1 1/4” | 2 1/2” |
Dim. “A” Bore | Dim. “B” | |
Spline Bore |
1 3/8” × 6 Spl. | 2 1/2” |
1 1/8” × 6 Spl. | 2 1/2” |
Dim. “A” Bore | Dim. “B” | |
Shear pin |
1'' | 2 1/2” |
1 1/8'' | 2 1/2” | |
1 1/4'' | 2 1/2” |
Dim. “A” Bore | Dim. “B” Bore | Keyway | Dim. “C” | |
Clamp Yoke |
7/8'' | 3/16” | 2 1/2” | |
1” × 15 Spl. | 2 1/2” | |||
1'' | 1/4” | 2 1/2” |
Dim. “A” Bore | Dim. “B” | Dim. “C” | |
With Hub O. D. Turned |
1/2” | 2 1/2” | 2” |
Universal Joints of Weasler 6 Series PTO Shaft
Dim. “A” Bore | Dim. “B” | |
Furnished with Keyway & Set Screw |
3/4'' | 5'' |
1'' | 5'' |
Tractor Yoke | Implement Yoke | Overall Compressed Length Dim. “A” | Max Running Length | Application |
1 3/8” × 6 Spl. Spring Lok | 1” Round with 1/2” Pin Hole | 39” | 60” | Finishing Mower |
1 3/8” × 6 Spl. Spring Lok | 1” Round with 5/16” Pin Hole | 39” | 60” | Finishing Mower |
1 3/8” × 6 Spl. Spring Lok | 1” Round 1/4” Keyway | 48” | 70” | Auger |
1 3/8” × 6 Spl. Spring Lok | 1 3/8” × 6 Spl. Spring Lok | 27 1/4” | 36” | Fertilizer Spreader |
1 3/8” × 6 Spl. Q.D. | 1” Round with 3/8” Pinhole | 38” | 55” | Finishing Mower |
Weasler 6 Series PTO Shaft Features
The Weasler 6 Series PTO shaft features a telescoping design, which allows for easy adjustment to the desired length. It also includes a locking mechanism to ensure the shaft stays securely attached to the tractor and implement. The shaft is made of high-strength steel and includes a greaseable universal joint to reduce wear and prolong the life of the component.
WLY is a leading manufacturer of PTO shafts and driveline components for agricultural and industrial applications. We can provide the perfect replacement for Weasler brand 6 Series PTO shafts. |
Agricultural PTO Gearboxes for Sale
Agricultural gearbox and PTO shaft: These components work together to transfer mechanical power between farm tractors. A PTO shaft converts engine energy into hydraulic pressure. This is what allows the tractor to pull heavy loads. When properly functioning, it reduces the risk of damage to the tractor and to the operator. When used properly, it is an important component of a tractor, but it can also become defective. When choosing an agricultural gearbox, consider the durability and mechanism of the product, as well as its materials. A durable gearbox will last for many years, avoiding repeated replacements. A high-quality agricultural PTO gearbox will be durable for many years to come, and you don't want to end up replacing it for a while. This can be costly, so consider your needs when purchasing an agricultural gearbox and PTO shaft.
Additional information
Edited | Zqq |
---|
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.