PTO Shaft-Replacement of Weasler 44 Series PTO Shaft
Weasler 44 Series PTO Shafts are a type of Power Take-Off shaft commonly used in agricultural machinery such as tractors and combines. PTO shafts are used to transfer power from the tractor’s engine to a variety of implements, such as mowers, balers, and sprayers.
The Weasler 44 Series PTO shafts are designed to be durable and reliable, with features such as a robust spline design and high-strength components to withstand the demands of heavy-duty use. They also come with a variety of end fittings to accommodate different implements and machinery.
It’s important to use the appropriate PTO shaft for your specific equipment, as using the wrong shaft can result in equipment damage, injury, or even death. It’s recommended to consult with a professional or refer to the equipment’s manual to ensure proper selection and installation of a PTO shaft. If you need help, feel free to contact us!
PTO Shaft-Replacement of Weasler 44 Series PTO Shaft |
Weasler 44 Series PTO Shafts are a type of Power Take-Off shaft commonly used in agricultural machinery such as tractors and combines. PTO shafts are used to transfer power from the tractor's engine to a variety of implements, such as mowers, balers, and sprayers.
The Weasler 44 Series PTO shafts are designed to be durable and reliable, with features such as a robust spline design and high-strength components to withstand the demands of heavy-duty use. They also come with a variety of end fittings to accommodate different implements and machinery.
It's important to use the appropriate PTO shaft for your specific equipment, as using the wrong shaft can result in equipment damage, injury, or even death. It's recommended to consult with a professional or refer to the equipment's manual to ensure proper selection and installation of a PTO shaft.
Weasler 44 Series PTO Shaft Parts
Tractor Yokes of Weasler 44 Series PTO Shaft
Dim. “A” Bore | Dim. “B” | |
1 3/8” × 6 Spl. | 5 1/2” | |
1 3/4” × 20 Spl. | 6 1/4” | |
1 3/8” × 21 Spl. | 5 1/2” |
Dim. “A” Bore | Dim. “B” Bore | |
1 3/8” × 6 Spl. | 5 5/16” | |
1 3/4” × 20 Spl. | 5 1/2” | |
1 3/8” × 21 Spl. | 5 5/16” |
Dim. “A” Bore | Shear Bolt | Dim. “B” | |
Ball Shear Device |
1 3/8” × 6 Spl. | (2) 3/8” - 16 Gr. 5 | 5 7/8” |
1 3/4” × 20 Spl. | (2) 3/8” - 16 Gr. 5 | 5 3/8” | |
1 3/8” × 21 Spl. | (2) 3/8” - 16 Gr. 5 | 5 7/8” |
Dim. “A” Bore | Dim. “B” | |
Auto-Lok |
1 3/8” × 6 Spl. | 5 1/2” |
1 3/4” × 20 Spl. | 6 1/4” | |
1 3/8” × 21 Spl. | 5 1/2” |
Cross & Bearing Kit of Weasler 44 Series PTO Shaft
Dim. “A” | Dim. “B” | |
1 5/16” | 4” |
Slip Sleeve of Weasler 44 Series PTO Shaft
Length | Dim. “A” | Dim. “B” | Fits Tube Size |
|
|
5” | 1 5/16” Sq. | 2 1/2” (.120 Wall) | |
5” | 1 11/16” × 20 Spl. | 2 1/2” (.120 Wall) | ||
|
8” | 1 11/16” × 20 Spl. | 2 1/2” (.120 Wall) | |
8” | 1 5/16” Sq. | 2 1/2” (.120 Wall) |
Shaft for Weasler 44 Series PTO Shaft
Length | ||
6'/3' |
Dim. “A” Size | Length | Major Dim. | |
Spline Shaft |
1 5/16” × 20 Spl. | 3’ | 1.380/1.375 |
1 11/16” × 20 Spl. | 3’ | 1.790/1.785 |
Shaft Weld Yoke of Weasler 44 Series PTO Shaft
Dim. “A” Bore | Dim. “B” Bore | Dim. “C” | |
With Bearing Groove |
1 5/16” Sq. | 4 1/8”. | |
1 11/16” × 20 Spl. | 3 11/16” |
Tube of Weasler 44 Series PTO Shaft
Length | |
6’ | |
3’ |
Tube Weld Yoke of Weasler 44 Series PTO Shaft
Dim. “A” | Fits Tube Size | |
With Bearing Groove |
4 5/8” | 2 1/2” (.120 Wall) |
4 5/8” | 2 1/2” (.120 Wall) |
Implement Yoke of Weasler 44 Series PTO Shaft
Dim. “A” Bore | Dim. “B” | Standard Keyway | ||
With Keyway & Set Screw |
1 1/4” | 4 5/8” | 1/4” | |
1 3/8” | 4 5/8” | 5/16” | ||
1 7/16” | 4 5/8” | 3/8” | ||
1 1/2” | 4 5/8” | 3/8” | ||
1 5/8” | 4 5/8” | 3/8” | ||
1 3/4” | 4 5/8” | 3/8” | ||
2” | 4 5/8” | 1/2” | ||
Dim. “A” Bore | Dim. “B” | Double Keyway | ||
1 1/4” | 4 5/8” | 5/16” & 1/4” | ||
1 3/8” | 4 5/8” | 5/16” & 1/4” | ||
1 1/2” | 4 5/8” | 5/16” & 3/8” |
Dim. “A” Bore | Dim. “B” | |
Square Bore |
1 1/8” | 4 5/8” |
Dim. “A” Bore | Dim. “B” | |
Spline Bore |
1 3/8” × 6 Spl. | 4 5/8” |
1 3/8” × 21 Spl. | 4 5/8” |
Dim. “A” Bore | Dim. “B” | |
Clamp Yoke |
1 3/8” × 6 Spl. | 4 5/8”: |
1 3/4” × 20 Spl. | 4 5/8” | |
1 3/8” × 21 Spl. | 4 5/8” | |
1 3/4” × 27 Spl. | 5” |
Dim. “A” Bore | Dim. “B” | Dim. “C” | |
With Hub O. D. Turned |
1” | 4 5/8” | 2 1/2” |
Dim. “A” | |
5 1/8” |
Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required. When the cross & bearing kit and yoke are assembled, the overall compressed length of the driveline will be 48” or 60”.
Shaft Size | Tractor Yoke | Overall Compressed Length Dim. “A” | Max. Length |
1 5/16” | 1 3/8” × 6 Spl. Q.D. | 48” | 72” |
1 5/16” | 1 3/8” × 6 Spl. Q.D. | 60” | 96” |
1 11/16” × 20 Spl. | 1 3/8” × 6 Spl. Q.D. | 48” | 72” |
Installation of PTO Drive Shaft
1. Press-fit the plastic tubes and plastic cones. |
|
2. Grease the groove on the yoke. | |
3. Slide the nylon bearings into the grooves. | |
4. Align the nylon bearing on the plastic shield |
Agricultural Gearboxes for Weasler 44 Series PTO Shafts
Weasler 44 Series PTO Shafts are commonly used in agricultural machinery such as tractors, combines, and balers. These shafts require a gearbox to transfer power from the tractor to the implement being pulled.
Here are some key things to consider when selecting an agricultural gearbox for a Weasler 44 Series PTO Shaft:
- Power Rating: The gearbox you choose must be able to handle the power output of your tractor. This information is typically provided in the tractor manual or by the manufacturer.
- Gear Ratio: The gear ratio of the gearbox must match the speed of the tractor's PTO to the speed required by the implement. Again, this information can usually be found in the tractor or implement manual.
- Shaft Orientation: The orientation of the gearbox's input and output shafts must match the orientation of the Weasler 44 Series PTO Shaft. This will ensure that the gearbox can be mounted correctly and that the shafts will align properly.
- Mounting Type: Gearboxes can be mounted in a variety of ways, including flange, foot, and clamp. Make sure the mounting type of the gearbox you select matches the mounting type of your tractor and implement.
- Lubrication: Gearboxes require regular lubrication to function properly. Make sure the gearbox you choose is easy to access for maintenance and that it has a sufficient capacity for lubricant.
Some popular manufacturers of agricultural PTO gearboxes for Weasler 44 Series PTO Shafts include Bondioli & Pavesi, Comer Industries, and Walterscheid. It's always a good idea to consult with a knowledgeable dealer or mechanic to ensure you select the right gearbox for your specific application. WLY Transmission can manufacture the replacement of these brands' gearboxes and PTO shafts according to customers' specific requirements.
Additional information
Edited | Zqq |
---|
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.