0 Items

PTO Shaft-Replacement of Walterscheid W2500 Series PTO Shaft

The W2500 series PTO shaft has a standard size of 1-3/8 inches in diameter with six splines and is rated to handle up to 250 horsepower. It is designed to be compatible with a variety of different implements and machines and can be used for applications such as powering rotary cutters, tillers, balers, and other equipment.

PTO Shaft-Replacement of Walterscheid W2500 Series PTO shaft W2500 PTO Shaft

The W2500 series PTO shaft is a type of power take-off (PTO) shaft commonly used in agricultural equipment and machinery. PTO shafts are used to transfer power from a tractor or other power source to an attached implement or machine.

The W2500 series PTO shaft has a standard size of 1-3/8 inches in diameter with six splines and is rated to handle up to 250 horsepower. It is designed to be compatible with a variety of different implements and machines and can be used for applications such as powering rotary cutters, tillers, balers, and other equipment.

When using a PTO shaft, it is important to follow proper safety procedures, such as ensuring the shaft is securely attached and guarded to prevent injury from rotating parts. Regular maintenance and inspection of the PTO shaft can also help prevent accidents and ensure reliable performance.

W2500 Series PTO Shaft

W2500 Series PTO Shaft Specifications

Application range
  • Harvesters
  • Soil cultivating machinery
  • Wood shredders
Properties
  • Tension side 1-3/8" (6) shaft collar kit
  • Machine side 1-3/8" (6) slide pin
  • Lubrication frequency from 50 to 100 hours
  • Fulfilling the requirements laid out in EC 89/392 EEC
  • Fulfilling the safety standard EN12965
  • CE marking available
Consists of
  • PTO shaft with shielding
  • Declaration of conformity
  • Instruction manual
Technical info
  • Max. dynamic capacity 540 rpm: 66 kW, 1175 Nm
  • Max. dynamic capacity 1000 rpm: 102 kW, 975 Nm
  • Values at working angle 5° and service life 1000 hours
  • LZ = slid in length in mm, from intersection to intersection

 

W2500 Series PTO Shaft Parts

The W2500 series PTO shaft is a standard series of PTO shafts used in various agricultural and industrial applications. The parts that make up the W2500 PTO shaft include:

  1. PTO Shaft Tubing: The main component of the PTO shaft, which is a hollow metal tube that transmits power from the tractor to the implement.
  2. PTO Shaft Yoke: The yoke is a component that attaches to the PTO shaft tubing and connects it to the implement. The yoke is available in various sizes and configurations to match the implement's requirements.
  3. PTO Shaft Guard: A safety component that covers the rotating PTO shaft to prevent contact with people or objects.
  4. PTO Shaft Bearing: A bearing that supports the PTO shaft and helps to reduce friction and wear.
  5. PTO Shaft Seal: A seal that prevents lubricant leakage from the PTO shaft.
  6. PTO Shaft Locking Collar: A collar that locks the yoke onto the PTO shaft tubing, preventing it from slipping or disengaging during use.
  7. PTO Shaft Pin: A pin that connects the yoke to the implement.
  8. PTO Shaft Pin Clip: A clip that holds the PTO shaft pin in place, preventing it from coming loose.
  9. PTO Shaft Retaining Ring: A ring that holds the PTO shaft yoke in place on the PTO shaft tubing.

These are the main components that make up a W2500 series PTO shaft. It's important to ensure that all parts are properly installed, maintained, and replaced when necessary to ensure safe and reliable operation.

Walterschied PTO Shaft Parts

W2500 Series PTO Shaft Tractor Yoke

Dim. “A” Bore
Dim. “B”
mm in.
Safety Slide Lock

Safety Slide Lock

1 3/8” x 6 Spl. 138.0 5.43”
1 3/4” x 20 Spl. 141.0 5.55”
1 3/8” x 21 Spl. 138.0 5.43”
Quick Disconnect YokeQuick Disconnect Yoke 1 3/8” x 6 Spl. 121.0 4.76”
1 3/4” x 20 Spl. 121.0 4.76”
1 3/8” x 21 Spl. 121.0 4.76”
Dim. “A” Bore
Dim. “B”
Shear Bolt
mm in.
Ball Shear DeviceBall Shear 1 3/8” x 6 Spl. 148.5  5.85” 3/8” - 16 Gr. 5
1 3/4” x 20 Spl. 161.8  6.37” 3/8” - 16 Gr. 5
1 3/8” x 21 Spl. 148.5  5.85” 3/8” - 16 Gr. 5

 

W2500 Series PTO Shaft Cross and Bearing Kit

Dim. “A”
Dim. “B”
mm in. mm in.
Cross and Bearing Kit 36.0 1.42” 88.8 3.50”

 

W2500 Series PTO Shaft Inner Profile Yoke

Dim. “A” Bore
Dim. “B”
mm in. mm in.
Inner Profile Yoke

With Bearing Groove

51.4 2.02” 106 4.17”

 

W2500 Series PTO Shaft Outer Profile Yoke

Dim. “A” Bore
Dim. “B”
mm in. mm in.
Outer Profile Yoke

With Bearing Groove

61 2.40” 111 4.37”

 

Inner Tube of W2500 Series PTO Shaft

Length
m
in.
Inner Tube 1.5 59.06”
1.0 39.37”

 

Roll Pin of W2500 Series PTO Shaft

Dim. “A”
Dim. “B”
mm in. mm in.
Roll Pin 10.0 .39” 90.0 3.54”

 

Outer Tube of W2500 Series PTO Shaft

Length
m
in.
Outer Tube 1.5 59.06”
1.0 39.37”

 

Implement Yoke of W2500 Series PTO Shaft

Dim. “A” Bore Dim. “B” Standard Keyway
mm in. mm in. mm in.
Round Bore YokeRound Bore
With Keyway & Set Screw
35.0 1.38” 118.0 4.65” 8.0 .31”
38.1 1.50” 118.0 4.65” 9.5 .38”
44.4 1.75” 118.0 4.65” 10.0 .38”
35.0 1.38” 118.0 4.65” 10.0 .39”
Dim. “A” Bore Dim. “B”
Pinhole
mm in. mm in. mm in.
Shear PinShear Pin
With Pin Hole
35.0 1.38” 117.6 4.63” 12.9 .50”
38.1 1.50” 118.0 4.65” 12.9 .50”
Dim. “A” Bore
Dim. “B”
mm in.
Clamp YokeClamp Yoke 1 3/8” x 6 Spl. 121.0 4.76”
1 3/4” x 6 Spl. 121.0 4.76”
1 3/4” x 20 Spl. 121.0 4.76”
1 3/8” x 21 Spl. 121.0 4.76”
Spline BoreSpline Bore
With Pin Hole
1 3/8” x 21 Spl. 110.0 4.33”

W2500 Series PTO Shaft

Overall Comp. Length Dim.“A” Max.
Running Length
Tractor Yoke Implement Yoke
36” 47” 1 3/8” x 6 Spl. QD 1 3/8” x 6 Spl. QD
40” 51” 1 3/8” x 6 Spl. QD 1 3/8” x 6 Spl. QD
55” 73” 1 3/4” × 20 Spl. QD 1 3/8” × 21 Spl. w/Pinhole
57” 76” 1 3/8” x 6 Spl. QD 1 3/8” x 6 Spl. QD

How to Maintain W2500 Series PTO Shaft?

The maintenance of a W2500 Series PTO Shaft typically involves the following steps:

  1. Cleaning: Before you start any maintenance work, you should first clean the PTO shaft to remove any dirt or debris. Use a wire brush or a rag to remove any buildup on the shaft, and wipe it down with a clean, dry cloth.
  2. Lubrication: Regular lubrication is crucial for the proper functioning of a PTO shaft. Apply a liberal amount of grease to the spline and yoke every 40 hours of operation or according to the manufacturer's recommendations. Be sure to use the correct type of grease specified by the manufacturer.
  3. Inspection: Regular inspection of the PTO shaft is important to catch any issues early on. Check for any signs of wear, damage, or looseness in the joints, bearings, and seals. If you notice any problems, you should address them immediately.
  4. Storage: When the PTO shaft is not in use, it should be stored in a dry, clean place. Coat the shaft with a thin layer of oil or grease to protect it from rust and corrosion.
  5. Replacement: If any parts of the PTO shaft are damaged or worn beyond repair, they should be replaced promptly. Do not attempt to repair or modify any parts of the PTO shaft on your own, as this could compromise its safety and effectiveness.

Proper maintenance of a W2500 Series PTO Shaft involves regular cleaning, lubrication, inspection, storage, and replacement of any damaged or worn parts. By following these guidelines, you can ensure that your PTO shaft performs safely and effectively for years to come.

PTO Shaft Maintenance PTO Shaft Maintenance
PTO Shaft Maintenance PTO Shaft Maintenance

Agricultural Gearbox for W2500 Series PTO Shaft

The W2500 Series PTO Shaft is a commonly used PTO shaft in agricultural machinery. The gearbox used with this PTO shaft needs to be rugged and reliable to withstand the demands of heavy agricultural use.
In addition to tractor PTO shafts, the agricultural gearboxes for the W2500 Series PTO Shaft are also available at WLY. The gearbox which features a heavy-duty cast iron housing and hardened gears for durability and longevity is designed specifically for agricultural use and is compatible with the W2500 Series PTO Shaft. It also has a high torque capacity to handle the demands of heavy-duty agricultural equipment. Additionally, the PTO gearbox has a wide range of gear ratios available, allowing for customization to fit the specific needs of your equipment. It also has a simple design for easy maintenance and repair.

As one of the professional transmission parts suppliers and manufacturers, WLY can manufacture agricultural PTO gearboxes that are reliable and durable for agricultural use with the W2500 Series PTO Shaft. Feel free to contact us!

Agricultural Pto Gearbox

Additional information

Edited

Zqq

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Eight reasons to choose us:

 

1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-one customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, one year warranty.
6. Supporting professional matched other equipments.
7. The company has more than one product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

 

Five Core strengths:

 

1. The first domestic independent R & D manufacturer and 22 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.