0 Items

PTO Shaft for Rears Pul-Blast Sprayers

A PTO shaft is an essential component of most agricultural equipment, including Rear Pul-Blast Sprayers. It transfers power from the tractor to the sprayer’s pump, allowing the sprayer to operate. The original equipment uses Weasler 55N Series. We offer the replacement of Weasler PTO shafts.

PTO Shaft for Rears Pul-Blast Sprayers

A PTO shaft is an essential component of most agricultural equipment, including Rear Pul-Blast Sprayers. It transfers power from the tractor to the sprayer's pump, allowing the sprayer to operate.

PTO Shaft for Rears Pul-Blast Sprayer

Rears has created a flexible driveline- a constant velocity hitch that will bend your tractor's power around a corner without bending your tractor. When powering through a turn using conventional driveline PTO systems, the angular acceleration and endthrust created punish both tractors and the implement. The constant velocity hitch is a vastly more efficient conduit: utilizing two monster u-joints and an equal angle pivot system, the Rears hitch removes angular acceleration and endthrust. Turns are smoother. PTO systems last longer.

Length and tractor connection may be modified.

Specifications of PTO Shaft for Rears Pul-Blast Sprayers

PTO Shaft for Rears Pul-Blast Sprayer

32'' OAL PTO Driveline

Y501: 1-3/8''6-Spline Q.D.
Y514: 1-1/2-17- Spline
1-11/16-20 Rolled Spl., Telescope
CROSS KIT: 55RW
Used on Pul-flail Shredder
Pantograph (540 RPM)
(CV Hitch to Gearbox) Std.

Selecting a PTO Shaft for Rears Pul-Blast Sprayer

When selecting a PTO shaft for Rears Pul-Blast Sprayer, it is essential to consider the following factors:

  1. Length: The length of the PTO shaft should match the distance between the tractor's PTO and the sprayer's pump. A shaft that is too short or too long can cause excessive wear and tear, leading to equipment failure.
  2. Size: The size of the PTO shaft should match the horsepower rating of the tractor and sprayer. A shaft that is too small may not transfer enough power, while a shaft that is too large may be too heavy and cause damage to the equipment.
  3. Safety: The PTO shaft must be properly shielded to prevent injury to the operator in case of a malfunction.
  4. Durability: The PTO shaft should be made of high-quality materials that can withstand the harsh conditions of agricultural work.

It is important to consult the owner's manual of the Rears Pul-Blast Sprayer and the tractor to determine the correct specifications for the PTO shaft. If in doubt, it is best to consult a professional technician to ensure that the PTO shaft is properly selected and installed.

PTO Shaft for Rears Pul-Blast Sprayer

Advantages of PTO Drive Shaft

PTO drive shafts are used in various applications to transmit power from a source to a driven implement. Some of the advantages of using a PTO drive shaft include:

  • Versatility: PTO drive shafts can be used in a wide range of applications, including agricultural equipment, industrial machinery, and construction equipment.
  • Efficient Power Transmission: PTO drive shafts are designed to transmit power efficiently from the source to the implement, minimizing energy losses and improving overall efficiency.
  • Reduced Maintenance: PTO drive shafts are built to withstand heavy use and are less likely to require frequent maintenance or replacement.
  • Safety: PTO drive shafts come equipped with safety features such as shields and guards that help protect operators from moving parts, reducing the risk of injury.
  • Increased Productivity: PTO drive shafts can be used to power multiple implements, allowing for greater productivity and efficiency.
  • Cost-Effective: PTO drive shafts are often more cost-effective than other power transmission systems, such as hydraulic or electric systems, making them a popular choice for many applications.

The use of PTO drive shafts can provide many advantages in terms of efficiency, safety, and productivity, making them a valuable addition to many types of equipment.

PTO Drive Shaft

Sprayer Gearboxes for Sale

Gearbox for Sprayer A sprayer gearbox is a mechanical component that powers the pump of a sprayer, enabling it to deliver pesticides or other liquids onto crops or other surfaces. It is typically mounted on the sprayer frame and powered by the PTO shaft from the tractor or other vehicle. The gearbox converts the rotational energy from the PTO into a reciprocating motion, which drives the pump's pistons or diaphragms. This creates the necessary pressure to deliver the liquid through the sprayer's nozzles. Sprayer gearboxes come in various sizes and configurations to match different sprayer models and applications.

As a professional agricultural gearbox manufacturer, WLY also has various sprayer gearboxes for sale. Contact now!

 

 

Additional information

Edited

Zqq

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Eight reasons to choose us:

 

1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-one customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, one year warranty.
6. Supporting professional matched other equipments.
7. The company has more than one product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

 

Five Core strengths:

 

1. The first domestic independent R & D manufacturer and 22 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.