PTO Shaft for PEECON Vertical Feed Mixers 1100, 1300, 1500, 1600, 1700
A PTO shaft (Power Take-Off shaft) is a mechanical component that transfers power from a tractor to an attached piece of equipment, such as a feed mixer. The type of PTO shaft required for a PEECON feed mixer will depend on several factors, such as the horsepower of the tractor, the speed of the PTO shaft, and the dimensions of the mixer’s input shaft.
We can provide PTO shafts that are suitable for PEECON vertical feed mixers1100, 1300, 1500, 1600, and 1700.
PTO Shaft for PEECON Vertical Feed Mixers 1100, 1300, 1500, 1600, 1700
A PTO shaft (Power Take-Off shaft) is a mechanical component that transfers power from a tractor to an attached piece of equipment, such as a feed mixer. The type of PTO shaft required for a PEECON feed mixer will depend on several factors, such as the horsepower of the tractor, the speed of the PTO shaft, and the dimensions of the mixer's input shaft.
The original equipment is Walterscheid 2580. And we can make high-quality replacements for Walterscheid PTO shafts.
PEECON Mixer Models
MODEL | CAPACITY | # OF AUGERS | MIN. POWER REQUIREMENTS |
---|---|---|---|
865
|
865 CFT
|
2
|
95 hp
|
1100
|
1100 CFT
|
2
|
135 hp
|
1300
|
1300 CFT
|
3
|
180 hp
|
1500
|
1500 CFT
|
3
|
200 hp
|
1600
|
1600 CFT
|
3
|
250 hp
|
Most tractors use 1.750-20 splines and the input shaft on most models is 1.750-6 splines. While other combinations are available.
Due to the newer Tractors and PTO boxes being 100% positive, many Peecon owners and dealers have gone to using an overrunning device mounted to the mixer in order to negate inertial loads. Additionally, we have had numerous requests for a longer than standard PTO.
Specifications of PTO Shaft for PEECON Vertical Feed Mixers
Main Shaft: CAT 6 Constant Velocity
Tractor Output Shaft
|
Complete CV Assembly |
CV 1/2 shaft |
Implement Half (2500) |
---|---|---|---|
540rpm 1.375‘’×6 spline |
2580 * 1.375-6 x open * with webbing w uj
|
2580 * 1.375-6 HALF SHAFT
|
2500 * S5 * * SC25 * NO END
|
1000rpm 1.375‘’×21 spline |
2580 * 1.375-21 x open * with webbing* w uj
|
2580 * 1.375-21 HALF SHAFT
|
2500 * S5 * * SC25 * NO END
|
1000rpm 1.750‘’×20 spline |
2580 * 1.750-20 x open ** webbing * 58 OAL CLOSED
|
2580 * 1.750-20 HALF SHAFT
|
2500 * S5 * * SC25 * NO END
|
Mixer Input Requirements:
2500 Series Automatic Clutches & Shear Bolt
Model | Diameter | Splines | Torque | |
K64/24 | 1.750 | 20 | 3500nm | |
K64 | 1.750 | 20 | 2500nm | |
K64/24 | 1.375 | 6 | 2700nm | |
K64/24 | 1.750 | 6 | 2700nm | |
K64/24 | 1.750 | 20 | 2700nm | |
KB61 | 1.375 | 21 | ||
KB61 | 1.375 | 6 | 2920nm | |
KB61/2 | 1.375 | 6 | 2920nm | |
KB61/2 | 1.375 | 6 | 2920nm | |
BTL | 1.750 | 20 | 2920nm | |
KB61/2 | 1.750 | 20 | 2920nm | |
KB61 | 1.750 | 6 | 2920nm | |
KB61/2 | 1.750 | 6 | 2920nm | |
KB61/2 | 1.9375 RD | 0.50 KEY |
To ensure that you choose the correct PTO shaft for your PEECON feed mixer, you should consult the manufacturer's specifications for both the mixer and your tractor. This will help you determine the appropriate length, size, and speed of the PTO shaft needed for optimal performance and safety.
Additionally, it's important to follow proper safety precautions when using a PTO shaft, including keeping it properly lubricated, maintaining the correct angle and alignment, and keeping all guards and shields in place. Always refer to the manufacturer's instructions and safety guidelines for your specific equipment to minimize the risk of accidents or injury.
Benefits of Feed Mixer PTO Shafts
PTO shafts are commonly used in feed mixers, particularly those that are operated by tractors. The following are some benefits of using a PTO shaft with feed mixers:
- Effective Power Transmission: PTO shafts allow for efficient power transmission from the tractor to the mixer. The shaft is directly connected to the tractor's engine, enabling the transfer of high torque and horsepower to the mixer. This guarantees that the mixer can handle heavy loads and mix feed quickly and effectively.
- Flexibility: PTO shafts are adaptable and can be used with various implements, including feed mixers. This makes them a favored option among farmers who have various implements that require power from the tractor.
- Cost-Efficient: PTO shafts are relatively affordable compared to other power transmission methods. They are also easy to install and maintain, reducing the overall cost of ownership.
- Safety: PTO shafts are designed to be safe to operate. They have a clutch mechanism that disengages the shaft if the mixer is overloaded or if the tractor operator needs to stop the machine quickly. This minimizes the risk of injury to the operator and damage to the mixer.
- Consistency: PTO shafts allow for consistent mixing of feed. The shaft transfers power directly to the mixer, ensuring that it rotates at a consistent speed. This helps to guarantee that the feed is mixed thoroughly, resulting in a consistent and high-quality end product.
PTO shafts offer several advantages when used with feed mixers. They provide efficient power transmission, flexibility, cost-effectiveness, safety, and consistency, making them a popular choice among farmers.
Agricultural Feed Mixer Gearbox Available
A feed mixer gearbox is a type of gearbox used in agricultural equipment to power the mixing mechanism of feed mixers. Feed mixers are used to blend and distribute feed to livestock in a consistent manner, and the gearbox plays a crucial role in powering the mixer.
The gearbox is typically mounted on the top of the mixer and contains a series of gears that transmit power from the power source (such as a tractor PTO) to the mixer blades. The gearbox may have multiple speeds or ratios to allow the operator to adjust the mixing speed and consistency to suit the needs of the livestock. Some feed mixer gearboxes are designed to be more durable and able to withstand the harsh conditions of agricultural work, such as exposure to dust, moisture, and heavy loads. They may also be designed for easy maintenance and repair, with easily accessible components and simple design features.
Feed mixer PTO shafts and agricultural gearboxes are important components used in farming machinery to help transfer power and torque from the tractor to other agricultural equipment.
WLY TRANSMISSION offers both PTO drive shafts and feed mixer gearboxes for sale at competitive prices. Contact now if you are interested!
Additional information
Edited | Zqq |
---|
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.