0 Items

PTO Shaft for Orchard Vineyard Sprayers 60HP, 100HP

A power take-off (PTO) shaft is a mechanism used to transfer power from a tractor or other power source to a variety of implements, such as an orchard or vineyard sprayer. WLY can offer PTO shafts for Orchard Vineyard Sprayers at competitive prices!

PTO Shaft for Orchard Vineyard Sprayers 60HP, 100HP

A power take-off (PTO) shaft is a mechanism used to transfer power from a tractor or other power source to a variety of implements, such as an orchard or vineyard sprayer. When choosing a PTO shaft for an orchard or vineyard sprayer, there are several factors to consider, including:

  • Length: The PTO shaft must be long enough to reach from the tractor to the sprayer, but not too long as to create a safety hazard or cause the shaft to wobble.
  • PTO size: PTO shafts come in different sizes, so make sure to choose a shaft with the correct size for your tractor's PTO.
  • Spline count: The number of splines on the PTO shaft must match the number of splines on the PTO drive of the tractor.
  • Safety features: Make sure the PTO shaft has appropriate safety features, such as a shielding or guard to prevent injury.
  • Quality: Choose a high-quality PTO shaft that is built to last and withstand the demands of your orchard or vineyard.
  • Maintenance: Regular maintenance and inspection of the PTO shaft is essential to ensure safety and longevity.

When selecting a PTO shaft for an orchard or vineyard sprayer, it's important to consult with a professional to ensure you choose the right size and type for your specific needs.

 

PTO Shaft for Orchard Vineyard Sprayers

Sprayer designs and connection sizes vary greatly. Rest assured we can manufacture whatever PTO shaft your rig happens to use.

For 60 HP Applications

PTO Shaft for Orchard Vineyard Sprayers

Main Shaft: CAT 5 Constant Velocity

Most tractors using 1.375-6 spline

PTO Shaft for Orchard Vineyard Sprayers

Typical thru - TANK SHAFT with overrunning protection

PTO Shaft for Orchard Vineyard Sprayers
If using a "combo" clutch on the main shaft, overrunning protection on the tank shaft is not needed.

For 90 HP and up Applications (540 RPM or 1000 RPM)

(Original Equipment is Walterscheid 2580)

Main Shaft: CAT 6 Constant Velocity

Most tractors use 1.750-20 spline and the input shaft varies. Other combinations are available.

PTO Shaft for Orchard Vineyard Sprayers

 

Characteristics of PTO Shaft for Orchard Vineyard Sprayers

The features of a PTO Shaft for Orchard Vineyard Sprayers can vary depending on the specific model and manufacturer. However, some common product features that you may find in a PTO Shaft for Orchard Vineyard Sprayers include:

  1. Material: PTO shafts are typically made of high-strength steel, which provides durability and can withstand the torque and stress generated by the sprayer.
  2. Length and Diameter: The length and diameter of the PTO shaft will depend on the specific model and type of Nelson sprayer that it is designed to work with. It is important to select a shaft that is appropriately sized for your equipment to ensure proper operation and prevent damage.
  3. Splined Ends: PTO shafts usually have splined ends that connect to the PTO output on the tractor and the input on the sprayer. The splines provide a secure and precise connection, allowing for efficient power transfer.
  4. Safety Features: Many PTO shafts are designed with safety features, such as shielding to protect the operator and bystanders from rotating components. Safety chains or straps are also commonly used to prevent the shaft from separating in the event of a failure.
  5. Compatibility: PTO shafts for Nelson sprayers are designed to be compatible with a range of tractors and other power sources. However, it is important to ensure that the shaft you choose is compatible with your specific equipment and meets any applicable safety standards and regulations.
  6. Ease of Use: Some PTO drive shafts may come with features that make them easier to use, such as quick-connect couplers or lubrication points for maintenance.

The characteristics of a PTO Shaft for Orchard Vineyard Sprayers are designed to provide efficient and safe power transfer between your tractor or other power source and your sprayer, allowing you to effectively apply liquid materials to your crops or other targets.

PTO Drive Shaft

How Do PTO Shafts for Orchard Vineyard Work?

PTO shafts are used in agriculture to transmit power from a tractor or other power source to equipment such as mowers, sprayers, and harvesters. In orchards and vineyards, PTO shafts are commonly used to power equipment for pruning, spraying, and harvesting.

The PTO shaft typically consists of a rotating shaft with a universal joint on each end, allowing it to transmit power at an angle. One end of the shaft is attached to the tractor's PTO output shaft, while the other end is connected to the equipment being powered. The equipment usually has a PTO input shaft that matches the size and speed of the tractor's PTO output shaft.

When the tractor engine is running and the PTO is engaged, power is transmitted through the PTO shaft to the equipment. The rotational speed of the PTO shaft is typically around 540 or 1000 revolutions per minute (RPM), depending on the tractor's PTO speed. The equipment is powered may have a gearbox to adjust the speed or torque of the power being transmitted.

In orchards and vineyards, PTO shafts are often used to power equipment such as mowers, sprayers, and pruning shears. For example, a flail mower may be attached to a PTO shaft and used to cut grass and weeds in between rows of trees or vines. A sprayer may also be attached to a PTO shaft and used to apply pesticides or fertilizers to crops.

It's important to note that PTO shafts can be dangerous if not used properly. Operators should always follow safety guidelines and make sure the PTO shaft is securely attached and properly guarded to prevent injury.

PTO Shaft for Orchard Vineyard Sprayers PTO Shaft for Orchard Vineyard Sprayers

 

Agricultural Sprayer Gearbox Wholesale Available

An agricultural sprayer gearbox is a device that is used to provide the correct speed and torque levels required to drive agricultural sprayers. These gearboxes are usually used to power sprayers for the application of liquid chemical fertilizers, weed killers, pesticides, and similar chemicals in a variety of agricultural settings. Often, this type of agricultural gearbox is designed with a range of speed outputs, allowing the user to adjust the flow rate of the sprayer. Additionally, the gearbox is designed to withstand the harsh conditions of agricultural use, including wet conditions and rough terrain.In addition to PTO shafts for Sprayers, sprayer gearboxes are also available at WLY! Gearbox for Sprayer

 

Additional information

Edited

Zqq

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Eight reasons to choose us:

 

1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-one customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, one year warranty.
6. Supporting professional matched other equipments.
7. The company has more than one product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

 

Five Core strengths:

 

1. The first domestic independent R & D manufacturer and 22 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.