PTO Shaft for Lawn Mower

Lawn Mower PTO Shaft

If you have a lawnmower, you should be able to see a PTO shaft if you take it to the shop. You can also use a measuring tape to get the proper length. Then, use the proper tool to tighten the shaft. A good PTO shaft will ensure that the mower is stable and will work well. If you're not sure what size shaft to purchase, you can contact us!

PTO shafts are a common accessory for many tractors. They are often connected directly to the transmission and are therefore ineffective when the tractor is out of gear. This can be a problem when mowing as you might have to overrun the clutch or leave the PTO shaft running constantly to keep the blades moving. Depending on the size of your mower, it may be necessary to purchase an adapter if the original shaft is too small.

A PTO shaft for mower is a necessary part of your mower. The PTO shaft is responsible for pushing the blades to the ground. This device will rotate the blades when mowed. It is a vital piece of machinery in a lawnmower. A lawn mower PTO shaft will make it possible for you to keep your lawn in good condition. A good lawn mower PTO shaft will last a long time.

PTO Shaft Code Explanation

For example:

1: The Types of Tubes(e.g.: T; L; ST; G)
2: The Series of Cross Kits
3: The Code of Color (YB=Yellow+Black)
4: The Code of Safety Shield Structure
5: Connection Method: Pin Connected
6: The Tractor End Yokes
7: The Implement End Yokes
8: Minimum Overall Length

Lawn Mower PTO Shaft Details

How to Lock a Lawn Mower PTO Shaft?

If you are unsure of how to lock a lawn mower PTO shaft, here's how to do it. The lock nut is a manufacturer-approved replacement part that's designed to lock the shaft into place. There are a few places that you can find this part, and you will need a wrench, socket set, and torque wrench. It's important to torque the nut only to the recommended torque level for your model, though.

The collar is a snap-on device on the deck shaft, which holds it in place. When it bottoms out on the PTO shaft, it snaps closed. To test it, lift the deck shaft off the tractor and turn 1/4 turn counterclockwise and clockwise. If it snaps closed when it's fully locked, it's likely that the collar needs lubrication. If it doesn't snap shut, you'll need to tighten it or lubricate it to ensure that it locks in place properly.

Assembly Lawn Mower PTO Shaft

Press-fit the plastic tubes and plastic cones.

Grease the groove on the yoke.

Slide the nylon bearings into the grooves.

Align the nylon bearing on the plastic shield.

Disassembly Lawn Mower PTO Shaft

Remove the 3 nylon bearing buckles with a screwdriver one by one, then take the inner and outer tubes apart from the plastic cone.

Take off the nylon bearings from the groove of the yokes.

Repeat the above-mentioned steps for the other side.

Related Lawn Mower PTO Shaft Parts

WLY is a member of Hangzhou Ever-Power Transmission. As one of the professional transmission hard parts suppliers in China, we offer various types of PTO shaft parts including torque limiters, u-joints, PTO end yokes as well as agricultural PTO gearbox. Contact us now to get more information!

Edited by Zqq.