0 Items

PTO Shaft for Jaylor Vertical TMR Feed Mixers: Single Auger, Twin Auger and Total Mix

The PTO shaft for Jaylor Vertical TMR Feed Mixers is an essential component that transfers power from the tractor to the mixer. The PTO shaft connects to the tractor’s PTO stub shaft and then to the input shaft of the mixer gearbox. We can offer PTO Shaft for Jaylor Vertical TMR Feed Mixers: Single Auger, Twin Auger and Total Mix.

PTO Shaft for Jaylor Vertical TMR Feed Mixers: Single Auger, Twin Auger and Total Mix

When selecting a PTO shaft for your Jaylor Vertical TMR Feed Mixer, it is important to ensure that it is compatible with your tractor's PTO and can handle the horsepower and torque requirements of your mixer. You will need to know the PTO speed (either 540 or 1000 RPM) and the length of the shaft required for your specific mixer model.

It is recommended to use a high-quality PTO shaft that is rated for heavy-duty use and has been tested to ensure its strength and durability. Always follow the manufacturer's instructions for installation, maintenance, and safe operation of the PTO shaft and mixer.

PTO Shaft for Jaylor Vertical Feed Mixers

Original Equipment is shown as Size 6 or Size 8 BYP copy.)- depending on HP
60 HP or less = CAT4 = Size 6
More than 60 HP = CAT5 = Size 8

Details of PTO Shaft for Jaylor Vertical TMR Feed Mixers

PTO Shaft for Jaylor Vertical Feed Mixers

Category Series Tractor
Tractors with 1.375"-6 PTO 4 (60 HP@540 RPM) S6 1.375-6
5 (90 HP@540 RPM) S8 1.375-6
Tractors with 1.375"-21 PTO 4 (60 HP@540 RPM) S6 1.375-21
5 (90 HP@540 RPM) S8 1.375-21
Tractors with 1.750"-20 PTO 4 (60 HP@540 RPM) S6 1.750-20
5 (90 HP@540 RPM) S8 1.750-20

 

Shear Bolt Yokes

Model Diameter No of Splines C-to-bolt Bolt c-e Length Torque
Size 6 Shear Bolt Yokes LB 1.375 21 55 M10x50 134 2700nm
LB 1.375 21 55 M10 4.8 2700nm
LB 1.375 6 55 M10x50 134 2700nm
SB 1.375 6 55 M10 2500nm
SB 1.750 20 55 M10 2500nm
LB 1.750 6 55 M10 4.8
LB 1.750 20 55 M10x50 134 2700nm
LB 1.750 27 55 M10x50 2700nm
LB 1.750 6 55 M10x50 134 2700nm
Size 8 Shear Bolt Yokes LB 1.375 21 50mm M12 143mm 3800nm
LB 1.375 21 M12 pin QD 3500nm
LB 1.375 6 50mm M12 143mm 3800nm
LB 1.375 6 50mm M12 143mm 3500nm
LB 1.375 6 M12 pin QD 3500nm
LB 1.750 20 50mm M12 143mm 3800nm
LB 1.750 20 M12 pin QD 3500nm
LB 1.750 27 M12
LB 1.750 6 50mm M12 143mm 3800nm
LB 1.750 6 M12 pin QD 3500nm

Check more information about our PTO shear bolt torque limiters.

PTO Shaft Parts and Structure

PTO Shaft Structure

  • Internal Yoke- There are two, located at both ends of the PTO shaft -tractor and implement. This is welded to the drive end.
  • Universal Joint- There are two at both ends of the PTO shaft.
  • External Yoke- There are two at both ends of the PTO shaft. It has a “Y” shape to connect to the U-joint and a female hole.
  • Safety Chains- The chains secure the PTO shaft onto the equipment and the tractor.
  • Safety Shield- These cones are found on both ends.

Advantages of PTO Shaft for Feed Mixers

PTO (Power Take-Off) shafts are widely used in feed mixers, especially those that are tractor-powered. Here are some advantages of using a PTO shaft for feed mixers:

  • Efficient Power Transfer: PTO shafts allow for efficient power transfer from the tractor to the mixer. The shaft connects directly to the tractor's engine, allowing for high torque and horsepower transfer to the mixer. This ensures that the mixer can handle heavy loads and mix feed quickly and efficiently.
  • Versatility: PTO shafts are versatile and can be used with a variety of implements, including feed mixers. This makes them a popular choice among farmers who have multiple implements that require power from the tractor.
  • Cost-effective: PTO shafts are relatively inexpensive when compared to other power transfer methods. They are also easy to install and maintain, which reduces the overall cost of ownership.
  • Safety: PTO shafts are designed to be safe to use. They feature a clutch mechanism that disconnects the shaft if the mixer becomes overloaded or if the tractor operator needs to stop the machine quickly. This reduces the risk of injury to the operator and damage to the mixer.
  • Consistency: PTO shafts allow for consistent mixing of feed. The shaft transfers power directly to the mixer, ensuring that it rotates at a consistent speed. This helps to ensure that the feed is mixed thoroughly, resulting in a consistent and high-quality end product.

PTO shafts offer several advantages when used with feed mixers. They provide efficient power transfer, versatility, cost-effectiveness, safety, and consistency, making them a popular choice among farmers. Regular inspection and maintenance of the PTO shaft and other mixer components are important to ensure safe and efficient operation. Always follow the manufacturer's recommended maintenance schedule and replace any worn or damaged components promptly.

PTO Shaft for Jaylor Vertical Feed Mixers

Feed Mixer Gearbox In Stock

A feed mixer gearbox is a component used in power-driven animal feed mixers. It typically transfers power from the engine to the tubs, blades, and drills inside the mixer. The gearbox helps modulate the speed and torque of the power source to the machine, allowing for more efficient and safer mixing of different materials. Feed mixer gearboxes come in various configurations, sizes, and capabilities, depending on the model of the feed mixer.

Feed mixer gearboxes are used to mix and blend animal feed for livestock. The gearboxes contain high-precision gears that help integrate the meal evenly and uniformly so that each animal receives an equal amount of nutrition. They also help to reduce noise and vibration from the mixing process. They generally come in two types- horizontal and vertical- and are designed to be durable enough to handle ongoing use. In addition to various PTO drive shafts, WLY also provides a wide range of feed mixer gearboxes for sale. Contact now!

Feed Mixer Gearbox Feed Mixer Gearbox

Additional information

Edited

Zqq

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Eight reasons to choose us:

 

1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-one customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, one year warranty.
6. Supporting professional matched other equipments.
7. The company has more than one product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

 

Five Core strengths:

 

1. The first domestic independent R & D manufacturer and 22 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.