PTO Shaft Cover

WLY PTO Shaft Cover

PTO Shaft Shield Parts

The PTO shaft is a key component of much agricultural equipment, such as tractors, rotary cultivators and lawn mowers. Without proper protection, a person may be pulled into the PTO shaft 5 feet away at a speed of 540 rpm. To protect yourself from such dangers, get a PTO shaft protection or PTO shaft plastic cover. This device will prevent clothing accessories from entanglement in the rotating shaft.

Most PTO-driven tools are equipped with a fully shielded PTO drive system to protect the operator from accidental entanglement. The guard consists of plastic that surrounds the drive shaft and includes bearings at both ends. When objects contact, the shield will stop rotating to prevent accidental winding and injury. The two ends of the transmission system shield are bell-shaped to protect the universal joints at both ends of the transmission system. The universal joints sometimes grab objects and entangle workers. Operators should not attempt to modify this mask to make maintenance easier.

PTO accidents can cause serious injury, including death. Despite these risks, the equipment manufacturer has taken measures to minimize the risks through appropriate maintenance and protective equipment. However, it is important to keep the PTO shaft plastic cover in place at all times. It prevents the risk of winding and shaft separation. By following these guidelines, you can maintain the security and operability of your patent and trademark rights. Take a moment to consider the advantages of using PTO drive shaft protection.

PTO Shaft Safety Shield Construction and Color

As one of the professional PTO shaft cover suppliers, WLY offers various types and colors of PTO shaft plastic covers. There are straight-type and wave-type, colors in yellow and black.

YIIIP-Yellow Straight Type                                                                                YIIP-Yellow Wave TypeYBIIP-Yellow and Black Wave Type                                                             BWIIP-Black Wide Angle Wave Type BIIP-Black Wave Type A                                                                                 BIIP-Black Wave Type BBIP-Black Three Claw Button Type                                                                         BIIP-Black Straight Type

PTO Shaft Cover Specifications

PTO Shaft Cover Replacement

If you have a PTO that is in need of repair or replacement, you can try looking for a new PTO Shaft Cover. This will not only give your PTO a new look but it will also keep your machine safe from damage. You can easily replace your PTO cover by following these simple tips. Here's how to replace the PTO shaft cover on your machine. You can even re-use the old one in case you ever need to use it for a new project.

First, you must ensure that your PTO is in good working condition. Most PTO-driven implements have a shear pin that prevents them from spinning freely. This prevents any possible entanglement and strikes of people in the area. Make sure to follow the manufacturer's recommendations for replacing the PTO Shaft Cover. Moreover, if the PTO shaft is not fully shielded, the operator's clothing and boots might get caught in the rotating shaft. Hence, if you're working on a machine with a PTO, you should disengage the PTO before you begin the repair. You should also turn off the engine and remove the key from the ignition. This way, you won't accidentally start up the PTO.

It is advisable to replace the PTO Shaft Cover with a new one, so it is not only safer but also more affordable. PTO Shaft Cover Replacement requires a little work on your part, but it will be well worth the effort. If you're unsure of the proper way to do it, here are some tips. Before you replace the PTO Shaft Cover, make sure you unhook it from the tractor.

How to Remove PTO Shaft Cover

Removing PTO shaft cover is simple and easy as below.

1. Remove the 3 nylon bearing buckles with a screwdriver one by one, then take the inner and outer tubes apart from the plastic cone.
2. Take off the nylon bearings from the groove of the yokes.
3. Repeat the above-mentioned steps for the other side.

Edited by Zqq.