MS Series Three-Phase Asynchronous Motor With Aluminium Housing
MS series aluminum housing three-phase asynchronous motors, with the latest design in entirety, are made of selected quality materials and conform to IEC standards. MS series three-phase asynchronous motors have good performance, safety and reliable operation, nice appearance. They can be maintained very conveniently while with low noise, little vibration, and at the same time, lightweight and simple construction. These motors can be used for general driving.
MS Series Three-Phase Asynchronous Motor With Aluminium Housing
MS series aluminum housing three-phase asynchronous motors, with the latest design in entirety, are made of selected quality materials and conform to IEC standards. MS series three-phase asynchronous motors have good performance, safety and reliable operation, nice appearance. They can be maintained very conveniently with low noise, little vibration, and at the same time, lightweight and simple construction. These motors can be used for general driving.
MS Series Three-Phase Asynchronous Motor Operating Conditions:
Ambient temperature:-15℃≤0≤40℃
Altitude: not exceeding 1000m
Rated voltage:380V
Rated frequency:50Hz、60Hz
Protection class: IP54、IP55
Insulation class: Class B/F
Cooling method: ICO141
Duty: S1 (continuous)
MS Series Three-Phase Motor Overall & Installation Dimensions
MS Series Three-Phase Asynchronous Motor Technical Data:
Model | Rated Output | Amps(A) | Speed r/min |
Frequency (HZ) |
LRT/RLT | BDT/RLT | LRA/RLA | EFF (%) |
Power factor (cosφ) |
|
kW | HP | 380V | ||||||||
Synchronous Speed 3000 r/min = 2 poles (50Hz) | ||||||||||
MS561-2 | 0.09KW | 1/6HP | 0.29 | 2700 | 50 | 2.2 | 2.1 | 5.2 | 62 | 0.77 |
MS562-2 | 0.12KW | 1/4HP | 0.37 | 2700 | 50 | 2.2 | 2.1 | 5.2 | 64 | 0.78 |
MS63M1-2 | 0.18KW | 1/3HP | 0.53 | 2720 | 50 | 2.3 | 2.3 | 5.5 | 65 | 0.8 |
MS63M2-2 | 0.25KW | 1/2HP | 0.69 | 2720 | 50 | 2.3 | 2.3 | 5.5 | 68 | 0.81 |
MS71M1-2 | 0.37KW | 3/4HP | 1.01 | 2755 | 50 | 2.2 | 2.3 | 6.1 | 69 | 0.81 |
MS71M2-2 | 0.55KW | 1HP | 1.38 | 2790 | 50 | 2.3 | 2.3 | 6.1 | 74 | 0.82 |
MS80M1-2 | 0.75KW | 1HP | 1.77 | 2845 | 50 | 2.3 | 2.2 | 6.1 | 75 | 0.83 |
MS80M2-2 | 1.1KW | 1.5HP | 2.61 | 2835 | 50 | 2.3 | 2.2 | 6.9 | 76.2 | 0.84 |
MS90S-2 | 1.5KW | 2HP | 3.46 | 2850 | 50 | 2.3 | 2.2 | 7 | 78.5 | 0.84 |
MS90L-2 | 2.2KW | 3HP | 4.85 | 2855 | 50 | 2.3 | 2.2 | 7 | 81 | 0.85 |
MS100L-2 | 3KW | 4HP | 6.34 | 2860 | 50 | 2.3 | 2.2 | 7.5 | 82.6 | 0.87 |
MS112M-2 | 4KW | 5.5HP | 8.2 | 2880 | 50 | 2.3 | 2.2 | 7.5 | 84.2 | 0.88 |
MS132S1-2 | 5.5KW | 7.5HP | 11.1 | 2900 | 50 | 2.3 | 2.2 | 7.5 | 85.7 | 0.88 |
MS132S2-2 | 7.5KW | 10HP | 14.9 | 2900 | 50 | 2.3 | 2.2 | 7.5 | 87 | 0.88 |
MS160M1-2 | 11KW | 15HP | 21.3 | 2930 | 50 | 2.3 | 2.2 | 7.5 | 88 | 0.89 |
MS160M2-2 | 15KW | 20HP | 28.8 | 2930 | 50 | 2.3 | 2.2 | 7.5 | 89 | 0.89 |
MS160L-2 | 18.5KW | 25HP | 34.7 | 2930 | 50 | 2.3 | 2.2 | 7.5 | 90 | 0.9 |
Synchronous Speed 1500 r/min = 4 poles (50Hz) | ||||||||||
MS561-4 | 0.06KW | 1/12HP | 0.23 | 1300 | 50 | 2.1 | 2 | 4 | 56 | 0.7 |
MS562-4 | 0.09KW | 1/8HP | 0.33 | 1300 | 50 | 2.1 | 2 | 4 | 58 | 0.72 |
MS63M1-4 | 0.12KW | 1/6HP | 0.44 | 1310 | 50 | 2.2 | 2.1 | 4.4 | 57 | 0.72 |
MS63M2-4 | 0.18KW | 1/4HP | 0.62 | 1310 | 50 | 2.2 | 2.1 | 4.4 | 60 | 0.73 |
MS71M1-4 | 0.25KW | 1/3HP | 0.79 | 1340 | 50 | 2.2 | 2.1 | 5.2 | 65 | 0.74 |
MS71M2-4 | 0.37KW | 1/2HP | 1.12 | 1340 | 50 | 2.2 | 2.1 | 5.2 | 57 | 0.75 |
MS80M1-4 | 0.55KW | 3/4HP | 1.52 | 1390 | 50 | 2.3 | 2.4 | 5.2 | 71 | 0.75 |
MS80M2-4 | 0.75KW | 1HP | 1.95 | 1390 | 50 | 2.3 | 2.3 | 6 | 73 | 0.76 |
MS90S-4 | 1.1KW | 1.5HP | 2.85 | 1390 | 50 | 2.3 | 2.3 | 6 | 76.2 | 0.77 |
MS90L-4 | 1.5KW | 2HP | 3.72 | 1400 | 50 | 2.3 | 2.3 | 6 | 78.5 | 0.78 |
MS100L1-4 | 2.2KW | 3HP | 5.09 | 1420 | 50 | 2.3 | 2.3 | 7 | 81 | 0.81 |
MS100L2-4 | 3KW | 4HP | 6.78 | 1420 | 50 | 2.3 | 2.3 | 7 | 82.6 | 0.82 |
MS112M-4 | 4KW | 5.5HP | 8.8 | 1435 | 50 | 2.3 | 2.3 | 7 | 84.2 | 0.82 |
MS132S-4 | 5.5KW | 7.5HP | 11.7 | 1440 | 50 | 2.3 | 2.3 | 7 | 85.7 | 0.83 |
MS132M-4 | 7.5KW | 10HP | 15.6 | 1450 | 50 | 2.3 | 2.3 | 7 | 87 | 0.84 |
MS160M-4 | 11KW | 15HP | 22.3 | 1460 | 50 | 2.3 | 2.3 | 7 | 88 | 0.85 |
MS160L-4 | 15KW | 20HP | 30.1 | 1460 | 50 | 2.3 | 2.3 | 7 | 89 | 0.85 |
Synchronous Speed 1000 r/min = 6 poles (50Hz) | ||||||||||
MS71M1-6 | 0.18KW | 1/4HP | 0.74 | 870 | 50 | 2 | 1.9 | 4 | 56 | 0.66 |
MS71M2-6 | 0.25KW | 1/3HP | 0.95 | 870 | 50 | 2 | 1.9 | 4 | 59 | 0.68 |
MS80M1-6 | 0.37KW | 1/2HP | 1.23 | 880 | 50 | 2 | 1.9 | 4.7 | 62 | 0.7 |
MS80M2-6 | 0.55KW | 3/4HP | 1.7 | 880 | 50 | 2.1 | 1.9 | 4.7 | 65 | 0.72 |
MS90S-6 | 0.75KW | 1HP | 2.29 | 905 | 50 | 2.1 | 2 | 5.3 | 69 | 0.72 |
MS90L-6 | 1.1KW | 1.5HP | 3.18 | 905 | 50 | 2.1 | 2 | 5.5 | 72 | 0.73 |
MS100L-6 | 1.5KW | 2HP | 4 | 920 | 50 | 2.1 | 2 | 5.5 | 76 | 0.76 |
MS112M-6 | 2.2KW | 3HP | 5.6 | 935 | 50 | 2.1 | 2 | 6.5 | 79 | 0.76 |
MS132S-6 | 3KW | 4HP | 7.4 | 960 | 50 | 2.1 | 2.1 | 6.5 | 81 | 0.76 |
MS132M1-6 | 4KW | 5.5HP | 9.5 | 960 | 50 | 2.1 | 2.1 | 6.5 | 82 | 0.76 |
MS132M2-6 | 5.5KW | 7.5HP | 12.6 | 960 | 50 | 2.1 | 2.1 | 6.5 | 84 | 0.77 |
MS160M-6 | 7.5KW | 10HP | 16.9 | 970 | 50 | 2.1 | 2 | 6.5 | 86 | 0.78 |
MS160L-6 | 11KW | 15HP | 24.2 | 970 | 50 | 2.1 | 2 | 6.5 | 87.5 | 0.79 |
Synchronous Speed 750 r/min = 8 poles (50Hz) | ||||||||||
MS80M1-8 | 0.18KW | 1/4HP | 0.83 | 645 | 50 | 1.9 | 1.8 | 3.3 | 51 | 0.61 |
MS80M2-8 | 0.25KW | 1/3HP | 1.1 | 645 | 50 | 1.9 | 1.8 | 3.3 | 54 | 0.61 |
MS90S-8 | 0.37KW | 1/2HP | 1.49 | 675 | 50 | 1.9 | 1.8 | 4 | 62 | 0.61 |
MS90L-8 | 0.55KW | 3/4HP | 2.17 | 680 | 50 | 2 | 1.8 | 4 | 63 | 0.61 |
MS100L1-8 | 0.75KW | 1HP | 2.43 | 680 | 50 | 2 | 1.8 | 4 | 70 | 0.67 |
MS100L2-8 | 1.1KW | 1.5HP | 3.36 | 680 | 50 | 2 | 1.8 | 5 | 72 | 0.69 |
MS112M-8 | 1.5KW | 2HP | 4.4 | 690 | 50 | 2 | 1.8 | 5 | 74 | 0.7 |
MS132S-8 | 2.2KW | 3HP | 6 | 710 | 50 | 2 | 1.8 | 6 | 79 | 0.71 |
MS132M-8 | 3KW | 4HP | 7.8 | 710 | 50 | 2 | 1.8 | 6 | 79 | 0.71 |
MS160M1-8 | 4KW | 5.5HP | 10.3 | 720 | 50 | 2 | 1.9 | 6 | 81 | 0.73 |
MS160M2-8 | 5.5KW | 7.5HP | 13.6 | 720 | 50 | 2 | 2 | 6.5 | 83 | 0.74 |
How to Test a Three-Phase Motor?
The first test you should complete when testing a three-phase motor is the physical condition of the motor. This will check the condition of the shaft, cooling fan, and main body of the motor. When visually inspecting any motor component, the power should be isolated and disconnected from the power source wherever possible.
(1) With the motor isolated, you should try and manually turn the motor. If this is easy to do, then this tests that the motor bearings are in good condition. If the motor does not turn quickly, it shows a mechanical issue, and the bearings or shaft may have failed.
(2) Another test is to visually inspect the condition of the body of the motor, the shaft, and the cooling fan. First, you should look at the motor’s external body, checking for any signs of cracking, corrosion, or damage.
(3) The next thing to look at is the condition of the motor’s shaft; this is easier done when the motor is disconnected from the coupling or the mechanical component it is connected to. You should ensure the shaft is in good condition with no major signs of wear, cracking, or damage.
(4) The final visual check should be on the condition of the cooling fan and the cooling fan housing. The cooling fan can be checked by removing the housing, usually secured by several screws. You should ensure that all of the blades of the fan are free from any cracks or corrosion. The cooling fan housing should also be checked for cracking, corrosion, or obvious damage.
MS Series Three-Phase Motor Manufacturer
WLY is an export-oriented manufacturer of Electric Motors, AC Generators, and Generator Sets. We specialize in R&D, production, sales, and customer service of said items and pride ourselves as professionals in a related area.
Our own brand consists of different models of motors listed below:
1. Three-phase asynchronous motor – IE series, Y2 series, YB series, etc.
2. Single-phase asynchronous motor –YC series, YL series, JY series
3. Aluminum Casing three-phase asynchronous motor –MS series
4. Aluminum Casing single-phase asynchronous motor–MC series, MY series, ML series
Throughout design, manufacturing process, material selection, production, equipment testing, and quality control, we make every endeavor to ensure our product is in strict accordance with the ISO9001 Quality Management System to yield high-quality products.
Our products travel widely from South-east Asia to as far as Middle-east, Africa also US and European countries. WLY has won high admiration and is widely trusted at home and abroad.
Additional information
Editor | Yjx |
---|
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.