JY Series Single-Phase Capacitor Start Induction Motor
JY series single-phase capacitor started asynchronous induction motor is suitable for places where a larger starting torque and a limited starting current are required and can be used as driving motor of air compressors, refrigerators, medical apparatus, and any other small machines which demand full load starting. These series motors have three types of frame sizes, 09, 1, and 2, which are enclosed fan-cooled, with the starting capacitor on the top of the motor. Depending on customers’ requests, the frames can be cast iron or cast aluminum.
JY Series Single-Phase Capacitor Start Induction Motor
JY series single-phase capacitor started asynchronous induction motor is suitable for places where a larger starting torque and a limited starting current are required and can be used as driving motor of air compressors, refrigerators, medical apparatus, and any other small machines which demand full load starting. These series motors have three types of frame sizes, 09, 1, and 2, which are enclosed fan-cooled, with the starting capacitor on the top of the motor. Depending on customers' requests, the frames can be cast iron or cast aluminum.
JY Series Single-Phase Induction Motor Operating Conditions:
Model Number: JY
Place of Origin: China
Color: Any Color
Output Power: 1/4HP-1.5HP
Ambient temperature: -15ºC<θ<40ºC
Altitude: not exceed 1000m
Rated voltage: 110V, 115V, 120V, 220V, 230V, 240V etc. on request
Rated frequency: 50Hz or 60Hz
Insulation class: B, F
Cooling method: IC0141
Protect Feature: Enclosed
Winding: 100% Copper Wire
Insulation class: Class B, Class F
Output: 100% Output Power
Protection class: IP44, IP54, IP55
Cooling Method: IC0141
Housing: Cast Iron Housing
JY Series Single-Phase Capacitor Start Induction Motor Technical Data:
JY Series Single-Phase Induction Motor Installation Dimension:
|Frame Size||Mounting Dimension (mm)||Overall Dimension (mm)|
Single-Phase Motor Overload Protection
During operation, short-time overload is generally allowed (the output power exceeding the rated value is called overload). However, suppose the load time is too long, and the temperature rise of the motor exceeds the allowable value. In that case, it will cause insulation aging, shorten the service life, and even burn the windings in severe cases. . Therefore, to prevent the motor from being damaged by overloading for a long time, the overload time must be limited. This protection is the overload protection of the motor.
Overload means that the load is too large, exceeding the equipment's rated load. The phenomenon is that the current is too large, the electrical equipment is heated, and the long-term overload of the line will reduce the insulation level of the line and even burn the equipment or line;
Overcurrent: As the name implies, the current is too large. There are many reasons, such as overload of electrical equipment (as above), line short circuits (including short ground circuits), equipment insulation damage, and so on. Exceeding the rated load capacity of the equipment is overloading. If the motor is blocked, the crane cannot move, and so on. Exceeding the rated current value limited by circuit design is overcurrent, such as thermal relay action, overcurrent relay protection action, circuit breaker tripping, etc.
Suppose the motor is overloaded for a long time, and the temperature rise of the motor winding exceeds its allowable value. In that case, the insulating material of the motor will become brittle, the service life will be reduced, and the motor will be damaged in severe cases. The larger the overload current, the shorter the time to reach the allowable temperature rise. Commonly used overload protection components are thermal relays.
The thermal relay can meet the following requirements: when the motor works at the rated current, the motor winding temperature rises to the rated temperature rise, and the thermal relay does not act; when the overload current is small, the thermal relay takes a long time to work, and the overload current is large. , the thermal relay will operate after a short period.
Due to thermal inertia, the thermal relay will not be affected by the motor's short-term overload impulse current or short-circuit current and act instantaneously. Therefore, when using the thermal relay for overload protection, it must also be provided with short-circuit protection. And the rated current of the fuse melt selected for short-circuit protection should not exceed four times the rated current of the heating element of the thermal relay.
When the working environment temperature of the motor and the operating environment temperature of the thermal relay is different, the reliability of the protection will be affected. There is a thermal relay using a thermistor as a measuring element, which can embed the thermal component of the motor winding and can measure the temperature rise of the motor winding more accurately.
Overcurrent protection is widely used in DC motors or wound asynchronous rotor motors. Short-circuit protection is not used for three-phase cage motors because short-term overcurrent will not cause serious consequences.
Overcurrent is often caused by incorrect starting and excessive load torque and is generally smaller than short-circuit current. Overcurrent is more likely to occur than short circuits during motor operation, especially in motors with frequent forward and reverse braking and repeated short-term work braking. In the course of the DC motor and wound rotor asynchronous motor, the overcurrent relay also plays the role of short circuit protection. Generally, the intensity value of the overcurrent action is about 1.2 times the starting current.
Single Phase Motor Manufacturers
WLY is a modern enterprise specializing in producing all kinds of motors. Among them, small and medium motors include Y, Y2, and IE2 series three-phase asynchronous motors, MS aluminum shell motors, YD series multi-speed motors, YCT series electromagnetic variable-speed motors, YVP variable-frequency and variable-speed motors, YEJ electromagnetic braking three-phase asynchronous motors, YC/YCL and YL single-phase series motors, JY single-phase asynchronous motors and MY/ML aluminum shell single-phase asynchronous motors.
Through systematic and scientific management and staff efforts, the company expands and develops year by year, with its product quality level continuously improving. The company has a batch of high-quality technicians who exert themselves to create high-quality Bulletproof" series products. Meanwhile, the company has modern equipment and an advanced assembly line production workshop to ensure product advantages.
In the business tenet of "Serve Customers Wholeheartedly," the company will always provide domestic and foreign customers with high-quality products and services.
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.