EP6 Series Wheel Drive Planetary Speed Reducer Gearbox
EP6 series wheel drive planetary speed reducer gearboxes are designed for self-propelled vehicles equipped with hydraulic or electric motors. As an experienced gearbox planetary manufacturer, we manufacture gearboxes with a wide choice of ratios to allow the electrical system to operate at optimum efficiency. Wheel-driven vehicle planetary gearboxes are capable of driving any type of machine with tire diameters up to 2.5m and 50 tons per wheel. The wide range of ratios makes it possible to provide solutions for any type of transmission and application. In addition, a manual clutch system allows the gearbox to be separated from the motor for emergency traction.
EP6 Series Wheel Drive Planetary Speed Reducer Gearbox
EP6 Series Wheel Drive Planetary Speed Reducer Gearbox Features
The EP600 series wheel drives by WLY Transmission Co., Ltd. enjoy the following features:
1. Output torque Range: 1750-60000 N.m
2. Gear Ratios: i=5.8-160
3. Support: rotating housing flange to fit wheels and drums
4. Applicable motors: axial piston hydraulic motors, Hydraulic orbit motors
5. Hydraulic motor options: Pressure relief valve, Overcenter valve on request
6. Brake: hydraulic released parking brake on request
EP6 Series Wheel Drive Planetary Speed Reducer Gearbox Benefits
EP6 series wheel drive planetary gearboxes are designed for self-propelled vehicles equipped with hydraulic or electric motors. As an experienced gearbox planetary manufacturer, we manufacture gearboxes with a wide choice of ratios to allow the electrical system to operate at optimum efficiency. Wheel-driven vehicle planetary gearboxes are capable of driving any type of machine with tire diameters up to 2.5m and 50 tons per wheel. The wide range of ratios makes it possible to provide solutions for any type of transmission and application. In addition, a manual clutch system allows the gearbox to be separated from the motor for emergency traction.
Specifications of EP6 Series Wheel Drive Gearbox
Wheel drives
Type |
Max. torque
N.m |
Range of ratios
( i ) |
Max. Input speed
(rpm) |
Braking torque
(N.m) |
Design |
EP601 L1A | 1750 | 5.77 | 1000 | 450-600 | A |
EP603 L2A | 4000 | 19-23-32-40 | 3000 | 210 | A |
EP603 L2B | 4000 | 19-23-32-40 | 3000 | 210 | B |
EP602 L2 | 5000 | 12.4-25.8 | 3000 | ----- | B |
EP605 L2 | 7000 | 22-27-30-42-53 | 3000 | 220-310 | B |
EP606 L2,L3 | 12000 | 30-35-43-68-79 | 3000 | 300-800 | B |
EP607 L2,L3 | 17000 | 33-75-108 | 3000 | 300-600 | B |
EP609 L2,L3 | 23000 | 33-142 | 3000 | 300-600 | B |
EP610 L2,L3 | 30000 | 20-111 | 3000 | 300-800 | B |
EP611 L2,L3 | 36000 | 41-47 | 3000 | 300-800 | B |
EP613 L3 | 45000 | 108 | 3000 | 300-800 | B |
EP615 L3 | 60000 | 108 | 3000 | 300-1000 | B |
Wheel Drives | Dimensions | |||||||||||
D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | L1 | L2 | L3 | Design | |
EP601 L1A | 260 | 230 | 200 | 152.4 | 203.2 | 230 | 15n=8 | M14×1.5n=8 | 245 | 195 | 10 | A |
EP603 L2A | 270 | 230 | 190 | 160 | 205 | 280 | M6×2n=8 | M18×1.5n=6 | 230 | 175 | 25 | A |
EP603 L2B | 270 | 230 | 190 | 200 | 245 | 280 | M6×2n=8 | M18×1.5n=6 | 230 | 72 | 128 | B |
EP602 L2 | 190.5 | 165.1 | 133.35 | 200 | 241.3 | 279.4 | 5/8”-11 UNC n=8 | 1/2”-13 UNC n=9 | 261 | 105.9 | 145 | B |
EP605 L2 | 270 | 230 | 190 | 220 | 275 | 310 | M16×2n=8 | M20×1.5n=6 | 285 | 72 | 176 | B |
EP606 L2,L3 | 330 | 300 | 270 | 280 | 335 | 370 | M16×2n=18 | M22×1.5n=10 | 320 | 115 | 190 | B |
EP607 L2,L3 | 380 | 285 | 240 | 320 | 380 | 410 | M20×2.5n=20 | M18×1.5n=20 | 408 | 82 | 298 | B |
EP609 L2,L3 | 380 | 285 | 240 | 350 | 400 | 435 | M20×2.5n=20 | M20×1.5n=16 | 413 | 91 | 303 | B |
EP610 L2,L3 | 375 | 340 | 300 | 350 | 400 | 435 | M20×2.5n=16 | M22×1.5n=16 | 425 | 91 | 303 | B |
EP611 L2,L3 | 425 | 325 | 290 | 410 | 455 | 490 | M20×2.5n=24 | M20×1.5n=24 | 498 | 110 | 365 | B |
EP613 L3 | 425 | 325 | 280 | 410 | 455 | 490 | M20×2.5n=24 | M20×1.5n=24 | 510 | 110 | 380 | B |
EP615 L3 | 500 | 460 | 420 | 460 | 510 | 550 | M20×2.5n=24 | M20×1.5n=24 | 565 | 130 | 415 | B |
Maintenance of Wheel Drive Gearbox
Wheel drive gearboxes are virtually maintenance-free under normal operating conditions. The only periodic operations required are checks on oil level and oil changes as follows:
- Oil Changes
- Change the oil first after 100-150 hours of operation.
- Subsequently, change the oil only every 2000-3000 hours operation depending on the application.
- Alternatively change oil once a year.
- Check the oil level in the gearbox every month and top up as necessary.
Established in 2006, WLY Transmission, a member of Hangzhou Ever-power, specializes in manufacturing slewing drive gearboxes, gearbox wheel drives and winch drives, which are widely used in construction machinery, petroleum, coal, geological exploration, ships, metallurgy, solar energy, wind energy, agriculture, and protection. After years of successful development, the quality of our products has been internationally recognized. We export our gearboxes to many parts of the world, including Southeast Asia, the Middle East, Germany, the USA, Canada, Spain, Australia, Turkey, and India. We are a growing company that aims to provide our global customers with high-quality products that meet their requirements.
Edited by Zqq.
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.