0 Items

Disc Mower PTO Shaft for New Holland Discbines

A disc mower PTO shaft refers to the power take-off (PTO) shaft that is used to transfer power from the tractor to the disc mower. The disc mower is a farm implement that is used to cut grass or hay for making silage or haylage.

We offer a wide range of disc mower PTO shafts of high quality for:
New Holland Discbines Model 411
Model 1431, 1432, 1409,1410,1411,1412,1441,1442,
Model H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560
Case IH DC132.

 

Disc Mower PTO Shaft for New Holland Discbines Model 411, 1431, 1432, 1409,1410,1411,1412,1441,1442, H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560 & Case IH DC132

WLY offers a wide range of disc mower PTO shafts of high quality for New Holland Discbines Models 411, 1431, 1432, 1409,1410,1411,1412,1441,1442, H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560 & Case IH DC132.

The PTO shaft connects the tractor's PTO driveline to the disc mower's driveline, which rotates the mower blades. The PTO shaft is usually telescopic, which allows it to expand and contract as needed. It also has a safety shield to protect the operator from any moving parts.

It's important to properly maintain and use the disc mower PTO shaft to ensure safe and efficient operation. This includes regular inspections, greasing of the U-joints, and making sure that the shaft is properly attached and secured. Additionally, it's important to keep loose clothing and long hair away from the moving parts of the disc mower and PTO shaft to prevent accidents.

Disc Mower PTO Shaft

Disc Mower PTO Shaft Specifications

Disc Mower PTO Shaft for New Holland Discbines 1431, 1432, Case IH DC132

PTO Shaft for Disc Mower

Original equipment is 55N Weasler 80 degree on the tractor side and a 50 degree CV on the discbine. Input shafts are usually 1.50" x 23 splines.

Tractor Implement Description
1.375-21 1.5" x 23 spline 55N 80x50 Double CV
none 1.5" x 23 spline 55N 50 degrees CV half(implement)
1.375-21 none 55N 80 degrees CV half(tractor)
1.750-20 none 55N 80 degrees CV half(tractor)

 

Disc Mower PTO Shaft for New Holland Discbines 411

PTO Shaft for Disc Mower

Tractor Implement Description
1.375-21 1.5" x 23 spline 55N 80x50 Double CV
none 1.5" x 23 spline 55N 50 degrees CV half(implement)
1.375-21 none 55N 80 degrees CV half(tractor)
1.750-20 none 55N 80 degrees CV half(tractor)
none 1.375-21 55N 50 degrees CV clamp yoke only

 

Disc Mower PTO Shaft for New Holland Discbines 1409,1410,1411,1412,1441,1442

Disc Mower PTO Shaft

Implement input shaft is usually 1.375-21 spline
Many models come equipped with CAT4 PTO. We recommend CAT6 for an improved life.
Often these PTO are short (36" OAL). Beware overturning !!!

Tractor Implement Description
1.375-6 none CAT6 CV with 1.375-21 yoke
1.375-21 none 55N CV without implementing yoke
1.750-20 none 55N CV without implementing yoke

Disc Mower PTO Shaft for New Holland Discbines H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560

Disc Mower PTO Shaft

All discbines use multiple PTO shafts and a combination clutch.
The types of PTOs and clutch locations vary from model to model.
Models below were originally equipped with Weasler and or Bondioli & Pavesi PTOs.

Model Primary Intermediate Secondary HP RPM
H7220
35N CV
35N Square
65
540
H7230
55N CV or standard
Jack style 1.375-21
H8 double CV
80
540/1000
H7320
35N CV
35N Square
65
540
H7330
55N CV or standard
Jack Style 1.375-21
H8 double CV
80
540/1000
H7450

55N Double 80/50 CV or 55N standard (for swivel)

55N standard
90
1000
H7460
55N Standard
55N Square w/clutch
55N Standard
100
1000
H7550

55N Double 80/50 CV or 55N standard (for swivel)

55N standard
55N standard
90
1000
H7560
55N Standard
55N Square w/clutch
55N standard
100
1000

 

Main Shaft: CAT 6 Constant Velocity

Tractor Implement Description
1.375-21 none 55N CV without implementing yoke
1.750-20 none 55N CV without implementing yoke

 

Most INTERMEDIATE and SECONDARY PTO: 55N Standard (Splined)

Disc Mower PTO Shaft Parts

Secondary PTOs

Many, but not all Discbine secondary shafts are a double CV with a combination clutch.

Recommended replacement: Category 5 Double CV

Disc Mower PTO Shaft

FNT34 Combination Clutch (Friction and Overrunning)

Disc Mower PTO Shaft

Features of Disc Mower PTO Shaft

The disc mower PTO shaft features a telescopic design that allows it to expand and contract as needed, and it connects the tractor's PTO driveline to the disc mower's driveline to transfer power. The PTO shaft is typically made of durable materials such as steel or aluminum and has U-joints that require regular greasing. It also includes a safety shield to protect the operator from any moving parts. Proper maintenance and use of the disc mower PTO shaft are crucial to ensure safe and efficient operation.

Disc Mower PTO Shaft

Disc Mower PTO Shaft for Sale

If you're in the market for a disc mower PTO shaft, there are several options available to you. These PTO shafts are essential components of disc mowers, allowing them to be powered by tractors or other vehicles. You can start at WLY TRANSMISSION for disc mower PTO shafts that are currently for sale. It's important to make sure you know the make and model of your disc mower to ensure that you purchase the correct PTO drive shaft that fits your specific machine. With a little research, you'll be able to find the perfect disc mower PTO shaft for your needs.

PTO Shaft

 

Disc Mower PTO Shaft and Agricultural Gearbox

In agriculture, a disc mower is a machine used for cutting grass, hay, or other crops. The disc mower is powered by a power take-off (PTO) shaft, which is connected to an agricultural gearbox. The PTO shaft transmits power from the tractor's engine to the disc mower, which rotates the blades and cuts the crop.

The agricultural gearbox is an essential component of the disc mower. It is responsible for converting the rotational speed and torque of the PTO shaft to the correct speed and torque required to rotate the blades of the disc mower. The gearbox must also be able to handle the varying loads and stresses placed on it during operation. We also provide various agricultural PTO gearboxes for sale. Contact us and get more information if you are interested!

Proper maintenance and lubrication of the PTO shaft and agricultural gearbox are crucial for the safe and efficient operation of the disc mower. Regular inspections and replacement of worn or damaged parts can help prevent equipment failure and ensure that the disc mower operates at optimal performance. Additionally, it's important to follow the manufacturer's guidelines for the proper use and care of the disc mower, including the PTO shaft and agricultural gearbox.

Pto Shaft Manufacturers

Additional information

Edited

Zqq

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Eight reasons to choose us:

 

1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-one customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, one year warranty.
6. Supporting professional matched other equipments.
7. The company has more than one product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

 

Five Core strengths:

 

1. The first domestic independent R & D manufacturer and 22 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.