0 Items

Combination Chain & Combination Transfer Chain C55, C55L, C60, C77, C188, BRH188, C131, C102B, C102 1/2, C111, C111C, C110, C133, C132, PW132, MBP132, MBP132C, C55A, C55B, C55D

The combination chain is widely used in the cement, paper and pulp, quarrying and mining industries for lifting and conveying a variety of abrasive and non-abrasive materials. It also has many uses in general industrial assembly conveyors.

Combination Chain & Combination Transfer Chain
C55, C55L, C60, C77, C188, BRH188, C131, C102B, C102 1/2, C111, C111C, C110, C133, C132, PW132, MBP132, MBP132C, C55A, C55B, C55D

Combination ChainThe Combination Chain is widely used in several industries, such as cement, paper and pulp, quarrying, and mining to elevate and transport various types of materials, both abrasive and non-abrasive. Additionally, it is increasingly being used in general industrial assembly conveyors. However, it is not recommended for use in drive chains. The Combination Chain can be constructed with either cottered or riveted connections. The pins have flat areas at their ends that fit into appropriately punched sidebars, which prevent pin rotation during chain operation. The pin holes are clean-cored to ensure smooth bearing surfaces and proper pin clearance. The chain adheres to strict dimensional standards of the industry, which allows for interchangeability with links from other manufacturers. The pitch sizes range from 1.631 to 6.050 inches, while the tensile strength ranges from 12,150 to 67,500 pounds. Combination Chain

Dimensions of Combination Chain

All our factory's Combination block links except C55 and C55L have elliptical barrels. This adds extra metal where the sprocket to chain contact causes most chain wear. Attachments are available in many of the pitch sizes for a wide range of applications. Combination links are symmetrical and may therefore be operated in either direction of travel. Cast steel sprockets are available for each pitch size. Combination Chain

Chain No. Pitch in Inches Weight Per Foot LBS. Average Ultimate Strength LBS. Maximum Working Load LBS. A C D E F H N T X Available Attachments
C55 1.631 2.2 9000 1400 0.69 2.06 0.375 1.97 0.75 0.72 - 0.19 1.25 A22,G19,F30,K1
C55L 1.631 2.5 11000 1400 0.69 2.06 0.375 1.97 0.75 0.72 - 0.19 1.25 None
C60 2.307 3 16000 2620 0.88 2.94 0.5 2.88 1 0.75 - 0.25 1.69 None
C77 2.308 2.3 11000 1640 0.69 2.38 0.437 2.25 0.88 0.72 - 0.19 1.25 F2,K1
C188 2.609 3.65 14000 2350 0.94 2.69 0.5 2.5 1.12 0.88 - 0.25 1.56 F2,G6,K1,K2,S1,G19
BRH188 2.609 4.8 14000 2350 0.94 2.69 0.5 2.5 1.12 0.88 3.12 0.25 1.56 None
C131 3.075 6.65 24000 3880 1.12 3.75 0.625 3.5 1.5 1.22 - 0.38 2.06 F2,G6,K2
C102B 4 6.75 24000 5400 2 4.56 0.625 4.38 1.5 0.97 - 0.38 2.91 K2
C102 1/2 4.04 9.5 38600 6530 2 5 0.75 4.38 1.75 1.38 - 0.38 2.91 K2,S1
C111 4.76 9.8 36000 7590 2.38 5.44 0.75 5 1.75 1.44 - 0.38 3.38 K2,S1
C111C 4.76 9.8 36000 7590 2.38 5.44 0.75 5 1.75 1.44 - 0.38 3.38 K2,S1
C110 6 6.2 24000 5380 1.94 4.56 0.625 4.38 1.5 1.25 - 0.38 2.88 K2
C133 6 8.8 36000 5900 1.25 4.31 0.875 4 2 1.75 - 0.38 2.88 None
C132 6.05 14.5 50000 11250 3.04 6.75 1 6.5 2 1.72 - 0.5 4.31 K2,F4,F10,AM115
PW132 6.05 14.5 50000 11250 3.04 6.75 1 6.5 2 1.72 5.88 0.5 4.31 S1
MBP132 6.05 14.5 50000 11250 3.04 6.75 1 6.5 2 1.72 5.88 0.5 4.31 S1
MBP132C 6.05 14.5 50000 11250 3.04 6.75 1 6.5 2 1.72 5.88 0.5 4.31 S1

 

Dimensions of Combination Transfer Chain

Combination Transfer Chain

Chain No. Pitch In Inches Style of Top Links Per 10 Feet Weight Per Foot LBS Average Ultimate Strength Recommended Maximum Working Load LBS. A C Db D E E1 F F1 J P T
C55A 1.631 A 74 3.2 11700 1400 2 1 0.72 0.375 0.69 1.25 0.75 0.75 0.88 1.25 0.19
C55B 1.631 B 74 3.2 11700 1400 2 1 0.72 0.375 0.69 1.25 0.75 0.75 0.88 1.25 0.19
C55D 1.631 D 74 3.2 11700 1400 2 1 0.72 0.375 0.69 1.25 0.75 0.75 0.88 1.25 0.19

 

Malleable Cast Combination Chain Maintenance

A malleable cast combination chain is a type of chain that is commonly used in industrial applications for conveying heavy loads. Maintaining this type of chain is essential to ensure its longevity and prevent costly breakdowns. Here are some tips for maintaining malleable cast combination chains:

  • Lubrication: Regular lubrication is essential to keep the chain moving smoothly and prevent wear and tear. Use a high-quality lubricant that is suitable for the specific application.
  • Inspection: Regularly inspect the chain for signs of wear, damage, or misalignment. Replace any damaged or worn-out components promptly.
  • Tension: Proper chain tension is crucial for optimal performance. Ensure that the chain is not too loose or too tight. An overly tight chain can cause excessive wear and strain on the components, while a loose chain can jump off the sprockets.
  • Cleaning: Regularly clean the chain to remove dirt, debris, and other contaminants that can cause premature wear.
  • Storage: When not in use, store the chain in a dry, clean, and protected environment to prevent rust and corrosion.

By following these maintenance tips, you can ensure the optimal performance and longevity of your malleable cast combination chain. Combination Transfer Chain

Additional information

Edited

Zqq

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Eight reasons to choose us:

 

1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-one customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, one year warranty.
6. Supporting professional matched other equipments.
7. The company has more than one product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

 

Five Core strengths:

 

1. The first domestic independent R & D manufacturer and 22 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.