Baler PTO Shaft for John Deere Round Balers 469, 569, Premium Round Balers
We manufacture high-quality baler PTO drive shafts. You’ll find a wide selection of PTO drive shafts here. You can contact us for more about our baler PTO shafts and other tractor parts.
Baler PTO Shaft for John Deere Round Balers
Applicable Baler PTO Shaft Models
John Deere Round Balers and Premium Round Balers
Models: 469, 569 Round Balers, and Premium Round Balers
John Deere uses CAT4 and CAT5 constant velocity drivelines depending on the model, with friction clutch or cam clutch.
Original Equipment PTO Shaft is Weasler "Equal Arm" CV
Input baler PTO shafts are 1.375-6 or 1.375-21.
Original Equipment
MAIN SHAFT: CAT 3, 4, 5 Constant Velocity
Available for tractors using: 1.375"-6 or 1.375"-21 spline. Other combinations are also available.
If you have 1.75" x 20 spline tractors output, we can modify the PTO CV head. Please contact us now!
Model | PTO | Protection |
---|---|---|
469 Standard | CAT4 | FRICTION CLUTCH |
469 Premium | CAT4 | CAM CLUTCH |
469 Silage | CAT4 | FRICTION CLUTCH |
569 Standard | CAT4 | FRICTION CLUTCH |
569 Premium | CAT4 | CAM CLUTCH |
569 Silage | CAT4 | FRICTION CLUTCH |
Baler Input Requirements
Universal Size | Torque nm |
---|---|
CAT3 / S4
|
1000nm
|
CAT3 / S4
|
1000nm
|
CAT4 / S6
|
1450nm
|
CAT4 / S7
|
1450nm
|
CAT5 / S8
|
1450nm
|
CAT5 / S9
|
1450nm
|
Details of WLY Baler PTO Shaft
If you're interested in purchasing a baler PTO shaft, you've come to the right place. And, of course, there are many other factors that you should take into consideration. Here are some things to consider.
The baler PTO shaft takes a lot of abuse. Whether yours is a constant velocity or a variable-speed one, it's important to check the baler PTO shaft once a year to ensure it's in good shape. Also, check the shaft's grease fittings to make sure they're in good condition. If they're not, you may need to replace them.
Power take-off (PTO) shafts transfer mechanical power from the tractor's engine to another piece of farm equipment. These PTO-driven implements include hay balers, rotary cutters, forage blowers, and weed eaters. The PTO shaft also protects the drive train from entanglement. While choosing the PTO shaft, keep the manufacturer's specs in mind.
Function
|
Drive Shaft Parts & Power Transmission
|
Use
|
Kinds of Tractors & Farm Implements
|
Yoke Type
|
Double push pin, Bolt pins, Split pins,Push pin, Quick release, Ball attachment, Collar.....
|
Processing Of Yoke
|
Forging
|
Plastic Cover
|
YW; BW; YS; BS; Etc
|
Color
|
Green; Orange; Yellow; Black Ect.
|
Series
|
T1-T10; L1-L6;S6-S10;10HP-150HP with SA,RA,SB,SFF,WA,CV Etc
|
Tube Type
|
Lemon, Triangular, Star, Square, Hexangular, Spline, Special Ect
|
Processing Of Tube
|
Cold drawn
|
Spline Type
|
1 1/8" Z6;1 3/8" Z6; 1 3/8" Z21 ;1 3/4" Z20; 1 3/4" Z6; 8-38*32*6 8-42*36*7; 8-48*42*8;
|
Place of Origin
|
Zhejiang, China
|
WLY Baler PTO Shaft
There are several suppliers of baler PTO shafts, including WLY, a member of Ever-Power Manufacturing. We manufacture high-quality baler PTO shafts at competitive prices. You'll find a wide selection of PTO drive shafts here. In addition, you can contact us for more about the baler PTO shafts for John Deere Round Balers and other tractor parts.
Length of a Baler PTO Drive Shaft
The length of a baler's power takeoff (PTO) shaft is a critical component in the machine's performance. Properly sized sprockets and chains are critical for optimal performance. In addition to the sprockets, the chain and idler sprockets can reduce the performance of the baler by allowing the pickup to jump or slip. Newer balers feature idler sprockets that are tensioned with springs to reduce their bending and giving under heavy load pressures. Properly tensioned chains and sprockets can prolong the life of your baler's components and help it run more smoothly.
Cutting a Baler PTO Drive Shaft
When cutting a baler PTO shaft, you must take into consideration the speed at which the machine spins. If the baler PTO shaft is too slow, the reaction time will be slower than the machine's speed. This is especially important when cutting a baler's PTO shaft. Make sure that you follow the manufacturer's instructions when cutting the baler PTO drive shaft. Also, keep your hands away from moving parts.
If the PTO shaft is not shielded, the baler PTO shaft may be a wrap point hazard. If the baler PTO shaft is completely unshielded, the entire driveline is a wrap point hazard. In addition, the baler PTO shaft may also be exposed to mechanical wear and tear, causing injury. Make sure to wear protective clothing whenever you are operating an implement. A baler PTO shaft is exposed to wear and tear, so protect your hands by using a harness.
Baler PTO Drive Shaft and Agricultural Gearbox
Not only do we offer high-quality baler PTO drive shafts, but also we could provide the agricultural gearbox at low prices! Contact us!
Baler PTO Drive Shaft Production Workshop
WLY Transmission Co., Ltd. is a member of Hangzhou Ever-power Transmission, which was established in 2006. The company is located in Zhejiang Hangzhou, with 90 employees, an area of 3800 meters, and an annual output value of 40 million yuan. The company is committed to the R&D, manufacturing, and personnel training of various gearboxes, reducers, and construction machinery, including spiral bevel gearbox, spur gearbox, worm gearbox, and cylindrical gearbox. It also includes a variety of high-pressure cast valve body and shell products. Its products are used in various applications, such as agricultural mowers, snow sweepers, fertilizer applicators, grain conveyors, industrial equipment, oil mining machinery, marine industrial equipment, and engineering hydraulic components. More than 95% of its products are exported to Europe, the United States, and Australia. Asia and Canada. The company has strong technology and R&D capabilities, produces reliable and high-quality products, pursues a unique business philosophy, and enjoys a high reputation in the manufacturing industry. Feel free to contact us by phone or email.
Additional information
Edited | Zqq |
---|
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.