Select Page

Materials Dealing with Energy UNIT one
Common Description
This energy unit is created for that fork lift market, consisting of really productive gear pump, DC motor, guide raise and decrease valve, tank, ect. The up and down motion are controlled through the lever of your guide release valve, which can be equipped with an electric switch to activate the motor. The lowing velocity is managed by the strain compensated flow handle valve.
Unique Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic parts concerned ahead of installation of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should also be clean and totally free of impurities, N46 hydraulic oil is advisable .
four. Oil changing is required following the first 100 operation hrs, afterwards once just about every 3000 hrs.
5. The energy unit shown is built to be mounted horizontally.

Materials Managing Power UNIT two
Common Description
This energy unit features electrical power up gravity down circuit. Activate the start off solenoid to begin the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the decreasing pace controlled from the stress compensated flow manage valve. Solutions of this series can be widely utilized in the industry of logistic devices including fork lift, mini lift table, and so on.
Particular Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned prior to mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
4. Oil transforming is needed right after the first a hundred operation hours,afterwards the moment each and every 3000 hrs.
5. The electrical power unit ought to be mounted horizontally.