Select Page

features a unique embedded magnetic device that increases effectiveness with a keyless tap to unlock the housekeeping cart or perhaps Space Station cart-leading console and programmed locking upon door closure. The eliminates lock/key breakage and related replacement costs.

stainless-steel or powder-covered housekeeping carts, recently redesigned with an increase of style and functionality.
Easy keyless entry
Cabinet automatically locks when door closes
Not any broken locks and keys
Able to retrofit about Shuttle Series® rounded-corner carts
The door lock assembly is a component for your washer and tells the washer that the door is closed and locked into place. If the switch has shorted out and not locking, it can be no more delivering the communication to the machine and it will not latch into place. If you discover that your door won’t close, open, or start, it is more than very likely a concern with the locker change assembly. The change is located behind the front panel. You need to take away the gasket to attain the switch.
The ignition lock assembly takes a key be inserted to get started on the engine. It really is essentially a secureness product that prevents the vehicle from being started with out a essential. The ignition lock assembly as well acts as a swap to carefully turn on and shut down the engine, interior functions, and the lights. In the ignition assembly are pins and tumblers that make sure only the right key will have the ability to start the vehicle. If those tumblers happen to be exhausted or sticking, the ignition lock assembly might not exactly turn even with the correct major inserted. If the main element or another international object breaks off in the ignition, the main element will not be able to be inserted all the way and won’t turn. Occasionally, the ignition lock assembly may stick in the ‘on’ or ‘run’ location, and the ignition won’t be able to turn all the way off.
Some keys only easily fit into the ignition one way. Flip the key over and check it out again before exchanging the ignition lock assembly.
The steering lock may well not allow the key to turn in the ignition. If the steering lock is normally engaged, try pulling on the steering wheel either way while wiggling the key in the ignition.
Ignition key will not submit the ignition assembly
Key element is stuck in the ignition
Engine won’t turn off
Ignition important is cracked due to staying turned in a stiff assembly.
Key element is broken in the ignition lock assembly.
If the ignition lock assembly won’t turn and your vehicle will not start, you can be left stranded waiting for a tow and a cab. If the ignition assembly can be trapped in the “on” position, your automobile can be left vulnerable to theft with the keys stuck inside. Replace the ignition assembly when symptoms begin.
Lock housing (base plate with mounting bolt holes and cover plate with rung install.
Lock hook – solid lightweight aluminum hooks that engage rungs.
Finger – solid metal finger – depress the hook to allow disengagement of the rung.
Spring – stainless torsion spring- provides programmed action to assembly.
Shoulder bolts & nuts, 3 each shoulder bolts & nuts contain the parts in place and hold the cover plate over the bottom plate.
Cover plate assembly includes a welded metal tube part that accepts the lock rung and rivets. Cover plates are made in 2 different versions.

Replacement lock assemblies can be purchased in pairs only and include instructions and all mounting fasteners.