Select Page

Elastomers In Compression
We features four sorts of elastomer styles to permit for additional versatility in addressing precise application specifications. 1 piece designs are utilized in the “L” and “AL” versions (called spiders) and a number of portion “load cushions” are used in the “C” and “H” model couplings. The load cushions are in sets of 6 to 14 pieces according to coupling size.
Sound Center Spider
The strong center design and style is frequently applied design and style when shafts of the driver and driven tools may be stored separate by a typical gap
Open Center Spider
The open center design and style will allow for that shafts on the driver and driven to get positioned within a quick distance
Open center spiders present shaft positioning flexibility but have a decrease RPM capacity
Cushions
Employed solely for your C and H Form couplings
Load cushions are held in location radially by a steel collar which can be connected to among the list of hubs
Snap Wrap Versatile Spider
Design and style will allow for quick removal with the spider with out moving the hubs
Enables for close shaft separation each of the way as much as the hubs greatest bore
Maximum RPM is 1,750 RPM using the retaining ring, but when utilised with the LC Sort (with collar) the usual RPM rating of the coupling applies
Design is accessible in NBR and Urethane only, and in limited sizes
Spider Elements
SOX (NBR) Rubber
The conventional materials that may be highly versatile materials that is definitely oil resistant
Resembles organic rubber in resilience and elasticity, and operates properly in temperature ranges of -40° to 212° F (-40° to 100° C)
Urethane
Has one.five instances greater torque capability than NBR
Excellent resistance to oil and chemical substances
Materials offers significantly less dampening result and operates at a temperature selection of -30° to 160° F
Hytrel
Versatile elastomer built for high torque and higher temperature operations
Operates in temperatures of -60° to 250° F (-51° to 121° C)
Bronze
Rigid, porous, oil-impregnated metal insert solely for low velocity (max 250 RPM) applications requiring large torque capabilities
Not affected by water, oil, grime, or extreme temperatures – operates in temperatures of -40° to 450° F (-40° to 232° C)