Select Page

Single and double reduction planetary gear drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high acceleration, low torque sources to provide decreased speeds at increased torques. The input side has standard SAE pads for motor mounting. Obtainable in the three result configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input swiftness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.

Wheel Drive
Input side has standard SAE pads and Plastic Gear Rack splined input. Output aspect has hub for mounting automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and temperature treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut supplies the greatest in shaft retention and shaft power. Output can be a spindle shaft or various sizes of integral pinion gears.