Select Page

Higher electrical power roller chains with enhanced fatigue power and influence power
HI-PWR-S roller chains are enhanced in fatigue power and influence power with no modifying the dimension in the pin length direction of regular roller chains. Plates are enlarged, and also the machining accuracy and assembling accuracy of components are improved. The roller chains hold substantial transmission efficiency for applications from low to large speeds and therefore are impressive enough to withstand long-term use.
Suggested uses
?In contrast to conventional roller chains, HI-PWR-S roller chains are larger in optimum kilowatt rating by about 30 percent within a medium to low speed assortment. They exhibit exceptional capability in places exactly where large shock loads are utilized, drive units for frequent start/stop, and in addition in large speed applications.

?Civil engineering machines this kind of as skid steer, trenchers, trucks, cranes, agitating trucks, forklifts and drive units for conveyors, elevators, stackers, etc.
Variety of chains
In general, pick your chain with reference to “Designing of Chain Transmission” and also towards the tables of “Drive Performance” and “Dimensions” of HI-PWR-S type roller chains.Nonetheless, only to get a distinctive case of lower pace and much less shock, “Low-speed selection” can be applicable.
HI-PWR-S Roller chains and ANSI standard chains would be the very same in standard dimensions. Use ANSI typical sprockets.
Connecting links and offset links
Use H connecting backlinks for HI-PWR-S. In an H connecting website link, the pins are lightly interference-fitted using the connecting plate. To the connection involving the connecting plate as well as connecting pins, spring pins are applied as opposed to cotter pins to get a common roller chain.
The center plates of an H connecting hyperlink for multiplex chain has bushings pressed in.
HI-PWR-S roller chains tend not to have any offset link. Use an even number of hyperlinks.
Hardly ever make the holes of the connecting plate larger and in no way make the pins thinner to facilitate the operate for fitting the pins in to the connecting plate, given that otherwise the fatigue power will probably be lowered.