Select Page

The EP Greenhouse gear reducer is a concise and lightweight reduction reducer with a limit switch system that’s suitable for assembly of a locally available electric motor. The reducer can be used in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gear reducer is rainproof and windproof. The gearbox includes a high protection class (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise gear driver for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel tranny means that the drive shaft is certainly locked when the decrease geared motor is not running. The completely sealed reduction gear driver comes with an expansion chamber with a diaphragm to keep carefully the gear oil at a low pressure under all circumstances, even at high temperature ranges. Thanks to the use of an expansion chamber, the gear motor can be installed in any placement. There are no limitations, since there is no dependence on a bleed connect. The sealed reduction gearbox keeps the apparatus essential oil of the geared motor in ideal condition because of its entire operating life time. The gear reducer is ideal for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, to which the right IEC standard motor can certainly be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an included chamber and can be enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and easy to adjust. The limit switch system’s optimum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear driver for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).