Select Page

The 14 sizes of standard roller chains can be found ranging from 25 to 240 like those in conformity with ANSI (American National Typical Institute), and ISO (Global Organization for Standardization).
The chains not merely meet the specifications for the minimum tensile strength prescribed by ANSI and ISO, but they also deliver the top class high quality while in the world including a higher fatigue strength
Suitable uses
?Basic use for driving and lifting equipment.
?Driving transfer units together with other tools. For multilevel parking.
Choice of chains
For selection of a chain, see the tables of “Max. Horsepower Ratings” for common roller chains and “Designing of Chain Transmission”. Nevertheless, only for a particular GW Style No-jam dredge pump situation of reduced speed and less shock, “Low-speed selection” method also can be referred to.
Typical roller chains as much as five strands can be found. The normal process for connecting pins and plates is rivet kind (RP).
The cotter variety (CP) is available for regular chains and HK chains of 80 or larger.
The normal roller chains could be engaged with conventional sprockets on the corresponding nominal numbers. For sprockets, refer on the table of “Dimensions” for every dimension of chain.
Connecting links and offset hyperlinks
For connecting hyperlinks and offset back links, refer on the table of “Dimensions” for every size of chain.
The connecting links are normally R or C connecting back links during which the pins are clearance-fitted with all the connecting plate. Since clearance-fitted links are inferior to the base chain in Max. allowable stress as while in the situation of one-pitch offset backlinks (OJ), “Low-speed selection” can’t be referred to. Since the Max. kilowatt ratings are decided contemplating the power of connecting hyperlinks and OJ, the clearance-fitted connecting links and OJ could be utilised in case the chains are chosen in accordance for the “General selection”. When a larger Max. allowable stress is required for that connecting hyperlink, make use of the interference-fitted connecting website link (H connecting website link) of the HI-PWR-S chain, and while in the case of offset links, use 2POJ.