Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric engine, capacitor and quickness control switch is still hooked up nevertheless the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for alter type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
Dimensions: The electric fan motor china engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” lengthy with a collection screw even. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you possess a pull-chain). In the event that you order several engine at the same time, we can do our better to supply your order with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan application. This is a completely enclosed fan electric electric motor and made to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electric powered motor will overheat and get into automatic thermal overload if run in a nonfan plan where there isn’t solid ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may have a steeper blade position.)
Origin: This electric motor is produced in China.