Select Page

DUMP TRAILER Electrical power UNIT- SINGLE ACTING
General Description
This electrical power unit has a electrical power up gravity down circuit. Start the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve may be offered if demanded. Also a pressure compen sated flow manage is often additional to the circuit to control the descent velocity of your cylinder.
Remark: Please seek the advice of our product sales engineer for your distinctive pump displacement, motor electrical power or tank capability.
Exclusive Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic parts concerned ahead of installation of the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities.N46 hydraulic oil is advised.
4. The electrical power unit really should be mounted horizontally.
5. Check the oil degree from the tank after the initial working of your energy unit.
six. Oil changing is required soon after the initial one hundred operation hours, afterwards when just about every 3000 hours.

DUMP TRAILER Energy UNIT-DOUBLE ACTING
Standard Description
This power unit features a power up power down circuit with load holding on each A & B ports. A strain compensatred movement manage can be additional to circuit to control the decent speed with the cylinder.
Unique Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned in advance of set up of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities. N46 hydraulic oil is encouraged.
four. The energy unit ought to be mounted horizontally.
five. Check the oil degree while in the tank just after the initial running of your energy unit.
six. Oil shifting is needed just after the preliminary one hundred operation hrs, afterwards once each 3000 hours.