Select Page

Generally, conveyor chains are operated for longer distances and at decrease speeds than transmission chains. Accordingly, even though the pins, bushings and rollers are left unchanged, and also the plate pitch is doubled to reduce the amount of sprocket teeth engaged with all the chain to half, the wear of pins, bushings and rollers is little since the chain pace is very low. Double Pitch Chains, conform to ANSI typical and “Ultimate Lifestyle Chain Series” and “Environment Resistant Chain Series”, as are single pitch chains can also be out there.
Double pitch chain with resin rollers
This is a Double Pitch Chain with R Roller made from resin, which generates much less noise and lighter excess weight compared with steel rollers. So, the chain is ideal for any conveyor system intended to operate quietly and convey light-weight articles or blog posts. Because the components besides rollers are manufactured from steel, the average tensile power of the resin roller chain could be the exact same as that of the steel roller chain. Nonetheless, the “maximum allowable load” in the chain should be stored lower, as shown during the following table, to prevent harm to the plastic rollers through the strain through the engagement with sprockets.
The “Allowable load of resin rollers” refers towards the allowable load acting when conveyed posts press the resin rollers traveling to the floor surface such as guid rails.
Massive roller (R) and little rollers (S)
Considering that double pitch chains are frequently utilized for conveying products on the horizontal floor, chains built for this purpose have increased roller diameter equal to that of single pitch chains on the exact same pitch for improved load capability and reduced traveling resistance. These rollers with greater outer diameter are called “large rollers”, and the typical rollers are named “small rollers”.
On this catalog, large rollers are expressed as R Roller, and smaller rollers as S Roller.
Designation of double pitch chains
A double pitch chain is designated, as inside the following instance, according to the nominal quantity of the single pitch chain it can be dependant on.
Connecting backlinks
For your connecting links of double pitch chains of all sizes, the connecting plates and connecting pins are clearance-fitted. For C2060H or smaller, the spring clip kind (R connecting link) is standard. For C2080H or more substantial, the cotter type (C connecting hyperlink) is standard. Connecting back links with an attachment, leading roller or side roller are also accessible.