Select Page

Any injury on the teeth surfaces of a sprocket diminishes the daily life of the conveyor chain.
With standard sprockets, considerably worn sprocket teeth have been repaired by teeth padding or the complete sprocket was replaced. In both case, restore was pricey and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for that dramatic financial savings in value and time.
Structure
The teeth can be replaced by two strategies: individual tooth replacement or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated about the ideal.
The above photo as well as the prime right illustration demonstrate a sprocket for person tooth substitute. Since the joint face involving the replaced teeth as well as sprocket is formed within a distinctive arc, the bonding accuracy is high and the sprocket strength is enhanced. Moreover, because the load acting on the mounting bolts is decreased, there’s much less possibility of loosening. This sprocket construction is patented.
You’ll find two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for large sprockets obtaining heavy loads and welded sheet steel hubs for other applications.