Select Page

Product features
One strand sprocket with one group of teeth around the circumference for applications in which a single chain can support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection on one aspect to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket includes a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It really is a sort B sprocket with a hub projection encircling the bore using one side, and both hub and bore possess Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. One’s teeth of the sprocket help prevent slipping and binding in order to avoid power loss in assemblies. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This solitary strand roller chain sprocket can be ideal for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including vehicle transmission systems, structure and agricultural products, conveyors, and factory manufacturing and assembly lines, among others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced the teeth ringing its circumference. The distance from the peak of one tooth to another is called the pitch, and is commonly measured in 1/8-” increments. The sprocket transfers power and movement by a roller chain that’s threaded over one’s teeth of the sprocket. The alignment of the chain with the sprocket’s pitch stops the chain from slipping to ensure that no power can be lost. In the center of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is definitely often suited to the sprocket’s hub to custom-suit the sprocket onto a shaft to carry it firmly set up. A hub is usually a protruding, elevated lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications needing sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to match all shafts can be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are found in a broad selection of applications where in fact the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining devices, aeronautics, robotics and space exploration, amongst others.

U.S. Tsubaki Power Tranny manufactures a number of chains, sprockets, and additional power transmission elements that meet International Business for Standardization (ISO) standards for quality assurance. The business, founded in 1917, is certainly headquartered in Wheeling, IL.